Voron CW2 Thermistor Holder + PCB Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a thermistor holder for most Voron printers that use the CW2 extruder. It also supports the Hartk 2-piece PCB.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 75
- Wydruki
- 2
- Wyświetlenia
- 785
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Hi, this is the Chamber Thermistor holder I use on my own LDO Rev. C Voron 2.4r2. I didn't like to see the Chamber thermistor the way the LDO holder attaches, so I designed this from the LDO .f3d file, and like how it works much better.
Effectively, this moves the thermistor from the outside of the cable cover to the inside, pointing out the back. This makes for an overall cleaner appearance.
It should fit most printers with a Clockwork 2 extruder, and supports the Hartk 2 piece PCB. I recommend printing it at 0.2mm layer height, and 4 perimeters, so pretty much just follow the Voron printing guide. However, since this part is not “structural” you should be able to use pretty much any settings, within reason.
By default, it supports the chamber thermistor that ships with the LDO kit. (ATC Semitec 104NT-4-R025H42G)