Thermistor stepper Zip-tie Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3950 NTC Thermistor Mounts (Glass Bead or 4 mm Round) — for 5 mm Zip‑Ties
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A pair of simple, universal mounts for securing thermistors using a 5 mm zip‑tie. Designed to strap onto steppers, extrusions, or any small flat surface where stable temperature readings are needed.
🔧 Two Versions Included
• Bead version — for classic 3950 NTC glass‑bead size thermistors
• 4 mm round version — for standard 4 mm cylindrical thermistors
🛠 How to Use
1. Choose the version that matches your thermistor type.
2. Place the bead or 4 mm sensor into the pocket.
3. Wrap a 5 mm zip‑tie around the mount and the part you’re attaching it to.
4. Tighten until the thermistor has firm, clean contact.
5. Route the cable however you prefer.
📌 Notes
• Print in PETG, ABS, or ASA if used near heat.
• Ensure the thermistor sits flush for accurate readings.
• Low‑profile design keeps it out of the way of belts, gears, and wiring.