Centauri carbon Thermistor-frame decoupler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small mount for the Centauri carbon chamber thermistor that thermally isolates the frame thermistor from the frame
- Ocena
- 5 / 5
- Polubienia
- 100
- Pobrania
- 541
- Wydruki
- 16
- Wyświetlenia
- 2333
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The centauri carbon has a chamber thermistor that is mounted to the frame with a steel screw and plastic spacer. The steel screw is thermally conductive enough to significantly skew chamber temperatures colder. I found that the built in chamber temp sensor read 5-7 C colder chamber heater's thermistor, however this discrepancy disappeared when the chamber temp sensor was not screwed directly into the frame. This printed adapter allows the thermistor to be screwed into a plastic mount to eliminate conduction to the frame and give more accurate chamber temperature readings.
The picture shows a slightly modified version that has an extra mount for the chamber heater thermistor but the one here is the same idea- screw the lower side into the frame, and use an m3 screw to screw the thermistor to the deeper hole.