Centauri carbon Thermistor-frame decoupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small mount for the Centauri carbon chamber thermistor that thermally isolates the frame thermistor from the frame
- Rating
- 5 / 5
- Likes
- 100
- Downloads
- 538
- Makes
- 15
- Views
- 2,320
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The centauri carbon has a chamber thermistor that is mounted to the frame with a steel screw and plastic spacer. The steel screw is thermally conductive enough to significantly skew chamber temperatures colder. I found that the built in chamber temp sensor read 5-7 C colder chamber heater's thermistor, however this discrepancy disappeared when the chamber temp sensor was not screwed directly into the frame. This printed adapter allows the thermistor to be screwed into a plastic mount to eliminate conduction to the frame and give more accurate chamber temperature readings.
The picture shows a slightly modified version that has an extra mount for the chamber heater thermistor but the one here is the same idea- screw the lower side into the frame, and use an m3 screw to screw the thermistor to the deeper hole.