Voron v2.4 Z chain guide with integrated thermistor mount remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed and modified version of Jeoje's Z chain guide with integrated thermistor mount for Voron v2.4 printers.
- Ocena
- 4,5 / 5
- Polubienia
- 29
- Pobrania
- 250
- Wydruki
- 4
- Wyświetlenia
- 1782
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a modified version of Jeoje's Voron V2.4 Z Chain Guide with Integrated Thermistor Mount.
This Z chain mount allows you to install a standard 3mm thermistor to monitor chamber temperatures.
Jeoje's original was designed for the chain guide to sit inside the Z chain loop. This modified version restores the chain guide to the normal location outside the Z chain (i.e. to the left of the Z chain).
I also tightened the tolerances on the hole for the thermistor probe, as I found the fitment too loose on the original. If the fit is too tight on this version, insert the back end of a 3mm drill to open up the hole slightly.
Update - 29 September 2023: orientation fixed on the .stl file.