HSW Switch Lite Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HSW Honeycomb Storage Wall mount and holder for the original Switch Lite.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The handheld fits snuggly into the mount, but goes in and out comfortably even with a Dbrand skin. The bottom of the model was cleared out so the console can be charged while mounted.
I went a bit overboard with the male hexagon pegs, I recommend using three adapters but two is plenty strong alone. Using all five will of course only increase its hold on the wall.
The .20mm profile is a little too fast and you may see some layer sagging in the overhang on the bottom corners, but if aesthetic isn't important it's not a long print. The .16mm profile should mostly take care of that, as well as give you a more defined logo.
The model is unfortunately too large to print on the A1 Mini.
This bulk of this model is a remix of MaupinMade's awesome Switch Lite Skadis Mount, which itself a remix of Rod's IKEA Skadis Fusion 360 Models (nothing included in this model). HSW pegs added in Blender.