HSW Switch Lite Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HSW Honeycomb Storage Wall mount and holder for the original Switch Lite.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The handheld fits snuggly into the mount, but goes in and out comfortably even with a Dbrand skin. The bottom of the model was cleared out so the console can be charged while mounted.
I went a bit overboard with the male hexagon pegs, I recommend using three adapters but two is plenty strong alone. Using all five will of course only increase its hold on the wall.
The .20mm profile is a little too fast and you may see some layer sagging in the overhang on the bottom corners, but if aesthetic isn't important it's not a long print. The .16mm profile should mostly take care of that, as well as give you a more defined logo.
The model is unfortunately too large to print on the A1 Mini.
This bulk of this model is a remix of MaupinMade's awesome Switch Lite Skadis Mount, which itself a remix of Rod's IKEA Skadis Fusion 360 Models (nothing included in this model). HSW pegs added in Blender.