HSW Spray Can Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HSW mount for spray cans. Holds 3 cans securely
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find an HSW spray can holder/mount that I felt like I could trust to stay on the wall, so I made a very sturdy one with seven small male hexagon pegs. Seven is probably overkill, as are the larger connectors I used in the attached images, but she ain't goin nowhere.
At least ~5 single HSW adapters required, 7 recommended.
PETG recommended, I used Elegoo's brown Rapid PETG. PLA would probably be fine, but I have not printed or tested it in it.
This is a remix of ccarruthers1990's Spray Can Wall Holder which you can simply screw into any wall you want. Print that if you don't have an HSW where you want to store your spray cans.