1 / 2
CB2 Heatsink Fan Mount 3010 and 2510
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a small fan onto the CB2 and its heatsink
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The CB2 doesn't get terribly hot, but if you want to mount a small fan onto it, here is your part. I recommend PETG at a minimum but ABS or PC if you have it.
There are two models - one for a 2510 and the other for a 3010. These can be bought cheaply on Amazon but be sure to get a 5v version and easily power it from your GPIO pins.
You'll need these screws:
- 4x - M2x20
- 4x - M3x10
