1 / 2
CB2 Heatsink Fan Mount 3010 and 2510
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a small fan onto the CB2 and its heatsink
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The CB2 doesn't get terribly hot, but if you want to mount a small fan onto it, here is your part. I recommend PETG at a minimum but ABS or PC if you have it.
There are two models - one for a 2510 and the other for a 3010. These can be bought cheaply on Amazon but be sure to get a 5v version and easily power it from your GPIO pins.
You'll need these screws:
- 4x - M2x20
- 4x - M3x10
