Pentax camera holder for Bogen enlarger to be used as copy stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to use an old Bogen 22A enlarger as a copystand with my Pentax DSLR, and designed this camera holder.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Wanted to copy documents and pictures with a Pentax and a Bogen enlarger
This stand makes the camera perfectly perpendicular to the enlarger table and allows the use
Fits Pentax K5/K3 (Also the KX and K100D)
Bogen 22A and 22B enlarger
Needs a 1/4"-20 nut and a screw to attach the camera
Also needs 2 small screws (Shoulder screws are best) with 4 - 4.5mm head to inser in the enlarger head holder to keep the horizontal alignment
Version with the EXT name needed trimming to use the Kenko Auto-Extension tube
Version with TOP changed the location of the mounting to above the camera to allow for closer pictures
Print Settings
- Rafts: Doesn't Matter
- Supports: No
- Resolution: 0.2 - 0.3mm
- Infill: stars 20-30%
- Filament material: PLA+
- Filament brand: MatterHackers / eSun
- Notes:
Use at least 5 perimeters and 5 solid top/bottom layers
Use a strong infill at least 15% to support the camera and prevent buckling over time
Strong infill might not be needed for ABS or PETG