Pentax camera holder for Bogen enlarger to be used as copy stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanted to use an old Bogen 22A enlarger as a copystand with my Pentax DSLR, and designed this camera holder.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 257
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Wanted to copy documents and pictures with a Pentax and a Bogen enlarger
This stand makes the camera perfectly perpendicular to the enlarger table and allows the use
Fits Pentax K5/K3 (Also the KX and K100D)
Bogen 22A and 22B enlarger
Needs a 1/4"-20 nut and a screw to attach the camera
Also needs 2 small screws (Shoulder screws are best) with 4 - 4.5mm head to inser in the enlarger head holder to keep the horizontal alignment
Version with the EXT name needed trimming to use the Kenko Auto-Extension tube
Version with TOP changed the location of the mounting to above the camera to allow for closer pictures
Print Settings
- Rafts: Doesn't Matter
- Supports: No
- Resolution: 0.2 - 0.3mm
- Infill: stars 20-30%
- Filament material: PLA+
- Filament brand: MatterHackers / eSun
- Notes:
Use at least 5 perimeters and 5 solid top/bottom layers
Use a strong infill at least 15% to support the camera and prevent buckling over time
Strong infill might not be needed for ABS or PETG