149 models
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
Just as it sounds, it's a rear lens cap for your K-mount lenses. Works on my lenses and with my printer but tell me if you believe i should change anything. Print Settings Rafts: Doesn't Matter Supports: No
I've made 4 versions of the camera body cap depending on what you'd like. one that keeps the locking pin in place and one that doesn't, and then each of those two options with or without the Pentax logo on it. I've printed the logo +…
Do you like it? Please consider to buy me a cup cup of coffee . That would make my day! UPDATES 2023-05-05 Do you want to replace the cap with a shutter? Then have a look at Thomas1234 shutter:…
EDIT: DO NOT SELL PRINTS OF THIS FOR PROFIT, and please don't buy from sellers on ebay/etsy etc. I haven't made a single dollar from this design, but ebay/etsy sellers have made thousands, which is really lame, and has prevented me from…
preferable to print with the EF side down.
WORK IN PROGRESS: I am still finetuning this design. PK-FX#2v10 is final… for now. I made an adapter to use my old Pentax 50mm lens on my brandnew Fujifilm X-S20. The lens will be fully manual of course, just like in the old days…. ;-)…
Printed mine in PLA with a 0.4 mm nozzle, 0.16mm layer height, 25% infill, no supports. Depending on the accuracy of your machine you may need to slow down the printing speed a bit to accommodate for the finer details. If you plan on…
Pentax K body cap with/without the old Asahi Optical Co logotype. No need to use support when printing. Regarding the pictures of the body cap, I have used sandpaper to make a more matte surface. NOTE: Harrow Technical UK writes “We do…
Adapter to use Pentax K mount lenses with a Micro Four Thirds camera. Print information: eMaker Huxley, supply3dpla.com PLA at 0.2mm layers Instructions Print, mount, shoot :) The connection between lens and adapter may need some axial…
Pentax 67 6x7 67ii Left hand grip
A simple yet effective lens cap for all pentax 67 lenses! easy to print, nice and simple and quick. Even has pentax 67 written on the bottom of it. (if you forget what lenses its for) PLA but will work with any fillement 15 percent infill…
Grip for Pentax 6x7. Made for my big hands and the index finger on the trigger. You need a 20mm M3 screw. Printed in Atomic filament CF-PETG. Version 2 has more space between grip and camera.
PROJECT INFO ------------------------------ I had someone approach me to design a body cap for the Pentax auto 110 camera, since originals are somewhat hard to come by, and I've decided to share it for anyone else who might need one.…
I needed a lens and viewfinder cover for my K1000. The design is just random lines given differing offsets. The lens cover should fit very tightly. However, the viewfinder I made a little more loosely. I had it tight on there, but it…
This is a replacement eyecup for Pentax film cameras. I made it for my Spotmatic but I know it also fits other models, just not sure exactly which ones. Needs to be printed out of a soft flexible filament in order to stretch over the…
The Pentax M series bodies are a great affordable entry into the analog SLR market. With access to great affordable K mount lenses and packed with more features than the now pricier K-1000. The only problem for me is their small size.…
I ony had one of these, but needed another two when my second Pentax 67 body failed and I decided to sell off my prisms. This is needed to protect the prism's exposed glass on the bottom when not on the camera. Can be printed in your…
Pentax 110 lens rear cap. Tight fight. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10% Filament: Clas Ohlsson PETG Black Notes: Snug fit so you may need some force to fit…
Accessory mount for Pentax Spotmatic, fit on the notches on the viewfinder. The shoe mount is design according to ISO-518:2006 specification. Print in the provided orientation with support enabled, like in the pictures. Change Logs:…
Pentax 100 SDUF is a classical imaging telescope, however, with the helical focuser that I detested. The default gear of Smallrig mini follow focus 3010 is 0.8 mode with 43 teeth, by adding the follow focus to Penatx 100 & changing its…
Cover for all pentax dlsr cameras, with a fixed hot shoe
This adapter is made to mount a pentax-K photographic lens to a M42x0.75 thread on an astronomy camera. It is made for camera with 12.5mm of back-focus (the distance between the front of the camera body and the sensor). The dot on the…
A remix of the excellent design by Thomas1234 so it fits the Pentax MX. Please, use PETG for best result. Use sandpaper to make the edges smooth and if you are using the fuzzy skin option, you may consider to use a steel brush in order to…
This is a negative holder for 35mm half-frame images, such as those produced by the new Pentax 17 camera. This negative holder has the correct lugs and size to fit on the Valoi360 advancer base, but you can use this with any light source.…
This is something I whipped up to go stargazing with a friend. It allows you to take pictures through the telescope with pretty much any Pentax camera that uses a K mount. Instructions I printed mine with black PLA, two walls, 20% infill…
Fits Arca-Swiss and RRS type tripod heads. Remember, this is plastic. Still, it holds my camera + 300mm lens in vertical orientation. Please remix and improve this. I uploaded 123D Design save file as well. Print instructions Category: 3D…
A Tilt-Shift adapter for using Pentax 6x7 lenses on Canon EF mount cameras. Shift and tilt can be set between plus/minus 17mm and 12.5 degree, respectively. I use it with the Pentax 6x7 1:4 55mm and an Canon 6D or 5DM2. The grip of the…
Eyecup for Pentax DSLRs, fits perfectly on Pentax K-R. Snaps into the existing parts on the viewfinder when printed in TPU. I haven't tried in PLA, but will probably work with a little shimmying.
A cover for the hotshoe connector on Pentax cameras.
(also works with Spotmatic SP, Spotmatic SPII, Spotmatic IIA, SP500, SP1000) Since the original batteries for the Spotmatic (the mercury 400-PX) are no longer being made, and the hearing aid zinc batteries are expensive, its annoying to…
Adapter for mounting Pentax 6x7 lenses on Canon EF mount DSLRs. Locks the camera and the lens in position. Line the red dot on the lens with the small dot on the mount and turn to the larger dot until it locks. 1x 25mm M3 screw and nut…
Designed in Creo, Measurements taken from camera The Design is symmetrical, so you can flip it. If there should be any issues, message me and I can modify it. Used to change shutter speeds easier on a Pentax 6x7 and 67. This thing gets…
D-Li90 battery - I have design so there is no sense to not upload it. Maybe someone can use it. Cover - that's what I need ;) Printed with PLA, no supports.
Battery Caddy for Fuji NP50/ Pentax D-Li68 single version and four batteries version printed with Prusa Mini+ with PETG
Cover for Pentax 6x7 prisms. Printed in Atomic filament PETG.
The film rewind crank for the Pentax MV is quite brittle, it will fall apart sooner or later... ... so I replaced it with a knob, which is glued with the shim. The knob will work nicely to rewind the film but you may use the crank for…
After designing a standard body cap for the Pentax auto 110 , a pinhole mod was suggested, and I loved the idea, so I made the necessary changes/tweaks and this is the result! Lots of fun to experiment with. There is an alignment dot, so…
I wear glasses, and it's tough to see the whole image through a prism finder. Since the original Pentax 67 Waist Level Finder is quite expensive, I searched online for a better solution but didn't find anything suitable. But then I found…
This is a Picatinny Style Rail, mounted on the Pentax 6x7. Out there are already plenty of accerories for this mount like cold shoes, grips and gopro holders. With this rail, which easily slides on, you can add needed features to your…
Fitting a fast camera lens to a sensitive astronomy camera gives you the ability to take deep wide field images for spotting meteors, asteroids and satellites. This adapter permits lenses with a Pentax M42 screw thread (easily available…
This is a remix I made to attach old PK camera lenses to a chinese USB microscope camera with C-mount thread. You will need use the "Amscope SM trinocular tube to C-mount adapter" https://www.thingiverse.com/thing:3563703/files to attach…
This image is an illustration shot freehand with an Agfa Parat, without this contraption. Examples with the P17 are coming DESCRIPTION These parts are used to create a panoramic tripod support for the new Pentax 17 half-frame film camera.…
This is a cover for the top focusing screen of the Pentax 6x7, it just needs at least 2 small magnets (6,5mm x 2,5mm) to hold on properly. (You can insert more to make it adhere more strongly) There are 3 versions, depending on your exact…
This is a camera lens adapter to convert CS mount to Pentax 110 lenses. This was originally designed as an adapter to Herr_Zatacke’s CS/C mount adapter for the Game Boy Camera here , but this can be used on any CS mount camera. This…
This prints with support up to the bayonet ring. It fits both ways; with the hood out for photography and with the hood in for storage.
Sorry I forgot to take a photo before glueing together. The OG model is super nice and would work well with supports. I just suck at getting my support settings right and I don't like the rough surface my supports always leave behind.…
A small battery holder for two Pentax D-LI90 batteries with contact protection and "easy to print" bottom (90° and use brim and support tree!!) To achieve strong construction, print with PLA-Tough or PLA-CF (best option) 0.2mm std layer 3…
Please find enclosed my first 3D design for a lens cap for the tiny Pentax 24 mm lens dedicated to the A 110. I create a little emboss inside the internal ring in the aim to clip it by using the thread of the filter fixation of the lens.…
No supports needed. .2mm layer height in PLA or PETG worked fine for me.
This is a grip for the Pentax Spotmatic and all of it's variants. There are three versions - thin, mid, and thick. Mid is probably best for most people, but thick is for if you either don't trust your prints or like a bit of extra muscle…
Stackable case for a Pentax 110 and its standard lenses. Uses 12 x 6x3mm magnets.
Best print in PETG. Use supports to obtain best results with the clutch cames.
Basically just wanted my ME Super to be a little more comfortable to hold without spending a fortune as you always end up doing with anything that has to do with photography. So, I did what anyone would do and spent the next several hours…
Lens hood for Pentax K 135/3.5, print and just push it on. I used the "Fuzzy skin" option in the print settings in PrusaSlicer 2.4.0. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 0.2…
Astroguider : C-Mount to Pentax-K Scope : This is a glorified adaptor for C-Mount astronomy cameras, it mounts on a Sky Watcher dovetail with two Kodak-thread holes separated by 3 cm. It is configured for SV Bony SV305 camera which have a…
Scan of the body cap for Pentax 645 cameras.
this model is just a remix with few additional modification. the only big difference was that mine was printed with an SLS printer.
This dial extender allows you to easily change the shutter speed dial while it's trapped under the metering prism connection. I consider it a necessary component as it's very awkward if you don't have the Pentax ring (and it seems that is…
replacement knob. Sorta old Leica style.. The stock knob was plastic and broke so I wanted something more solid. you will need a laptop computer screw. Seems to be about an m2 or something. I spent way to much time at hardware stores and…
Works with Pentax Q 02 Standard Zoom lens and the stock camera strap. 40.5 mm diameter cap 20 mm wide strap Change the “Pentax Q” text in the project file to your name or phone number in case your camera is lost.
Bayonet style lens hood for Pentax 6x7 90mm or 105mm lenses. Should work with longer Pentax lenses with 67mm diameter filter size. With 100% scale it may be a bit too tight. I printed it 99.77% scaling and it worked out great.
If you need a lens cap to go on the front of your Takumar 75mm F/4.5 then this fits perfectly and tight. I designed to be simple and easy to print too. It fits tightly on the front but you can still take it off without too much pressure.…
Sony E to Pentax 67 adapter to mount Pentax Asahi 67 lenses on Sony camera. It also has the locking mechanism that uses spring from any cheap ball pen. To add spring to the locking mechanism: Inset the spring into the round grove Cut the…
I had bought the lens thinking it was Nikon F mount cause Pentax K and Nikon F look similar. I removed the Pentax K mounting Bayonette and created a Nikon F version from it. I did have to remove the little Metall hook thats part of the…
A remix of Simple Flash Stand by Cederb. I added the Pentax logo, removed the holes and extra space at the front of the hot shoe, and put a third support bar down the middle front for added rigidity. This is my first uploaded model, so…
I created a cover for Pentax D-Li109 batteries. There are grooves on the sides so that the cover fits better. Since the battery is symmetrical, it is possible to signal whether the battery is charged or discharged by simply turning it…
Shutter speed ring in order to easily set shutter speed on your Pentax 6x7.
Cześć! Przedstawiam adapter dla aparatów Pentax (K) umożliwiający montaż w dwucalowym (2") wyciągu teleskopu astronomicznego. Pozdrawiam!
For those who tend to have all of those lenses and would like to display them on a shelf, I thought it would be nice to have a rear cap with some level of chunkiness to match those beasts. They feature deep design grooves to allow a…
Buy any Loreo Lens Cap and convert it to a Pentax K cap! I bought a Loreo Lens Cap for Canon, removed the Canon mount and made a Pentax K mount for the lens cap. This Pentax K mount works also on the PC lens cap made by Loreo. Do you like…
lens adapter to use an Argus C3 lens with a Pentax K2 film camera. (1.75 mm white filament used to indicate where to attach the adapter to the camera) Print time on Ender 3 Pro: 2 hours 21 minutes total filament use: 8g/ 2.81 m
Updated version of the Pentax rear lens cap, uses 1.75mm NinjaFlex or any other soft and flexible filament like TPU or PEBA as a gasket. The NinjaFlex protects the electrical contacts against dust and cleans them every time the cap is…
No hay mucho que decir, para cualquier aficionado a la fotografía analógica y que use una Pentax P30. Yo lo hice en ABS pero puede hacerse con cualquier material. Lo saque de un archivo STP de la cámara completa y lo adapte para su uso.…
UPD file in grippp2 this printable
The front cap is a friction fit, while the back cap locks in place via the camera's mounting points. I added texture to the outside edges to make it easier to put on and take off.
Pentax 67 prism LOGO replcement
A tiny, slightly adjustable (3-position) f-stop lock for use with this reverse-mount ring light adapter . Place the V of this part over the lens' aperture slider, then slide one of the three notches over the vertical stop for the…
USB shutter control cable for DSLR (Canon,Pentax,Sony,Nikon) Using RTS-on-COM shutter driver in some Astrophotography software: DSLR Shutter , APT , SGPro INDIGO Wiring diagram nad PCB on EasyEDA BOM 1x CP2102 USB 2.0 to TTL UART Module…
A Pentax Spotmatic Correction Lens Adapter is hard to find on eBay. The adapters that fit the Pentax MX/ME and later cameras will be too wobbly if you use them on an older camera like Pentax K1000 or screw mount cameras like Spotmatic. I…
A lens hood for the Pentax Q10 Lens 02 (5-15mm). There are two parts to color offset the inside of the lens hood, or just use black. The fit is naturally tight, use a little spit to push them together, and once in place will stay locked…
Adapter to attach a reversed Pentax K-mount lens to a Neewer macro led ring light. Like the lens cap this is remixed from, the k-mount tolerances are fairly tight, so some manual cleanup may be required to allow this to install smoothly.…
Náhrada ztracené krytky na kontaky pro připojení gripu v těle pro Pentax K-5, K-5 II, K-3, K-3 II. Tiskněte z TPU nebo z jiného pružného filamentu.
Simple protector for Pentax K10D/K20D battery terminals. Model of battery of mine is NP-400. I'm also uploading FreeCAD project file. If you are brave enough, feel free to modify it :)
Linhof and Graflex lensboard conversion for pentax 67 165mm f2.8 cheap CNC lensboard https://gy2025.com/#/home/proofing
I wanted to resurrect my Pentax 67 that I bought on a trip to Japan but it's battery was depleted after a few years. Trying to order an original V28PX battery turned out to be quite difficult so I tried a few adapters on the internet but…
NOTE: The .stl is oriented with the bottom side up, just because of my process in blender… You probably want to put that side down when you print it 👍 This is a very compact arca-type tripod plate designed to fit the original Pentax K-3.…
A Pentax D-Li106 battery for a Pentax X90 camera and others. ready to hack for a battery grip! Category: Camera
Pentax Q Fish-eye focus holder ring. Designed in Tinkercad. Printed with Prusa sample PLA.
This is a 0.8 MOD gear 60T for the focuser wheel of Pentax 75SDHF telescope, which is used for focus automation via ONSTEP ASCOM driver.
I took my original desinged but remodelled it to you can change the colour of the text to your desired colours. I printed mine on the Bambu P1s using the AMS unit in black and yellow but you can choose any colour filament. printed in PLA…
Pentax Asahi logo replacement for Pentax 67 or 6x7. I've printed using 0,2 nozzle, but 0.4 should works as well. I've used AMS to use 2 colors.
Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR Support ZWO EAF and ZWO ASiair OpenSCAD source code on GitHub BOM 1x Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR 1x PK-EOS Mount Adapter Ring 1x ZWO…
Printed with latch facing down, does not require supports
Pentax 67 to Canon angle finder C adapter
The large rubber eyecup that protects the diopter adjustment on the Pentax Z-1p/PZ-1p breaks down over time. They are often missing or broken. There are no replacements available. I whipped up this 3d printable one in F360. It does NOT…
NOTE: With recent updates in the Game Boy Camera scene, this model has been depreciated for a more modern build. Uploading regardless to preserve my works. This is a remix of Herr_Zatacke's CS mount for the Game Boy Camera and BETLOG's…
I ordered an old Pentax-F 35-70mm lens but it's missing a focus ring so I design one that is easily printable without any support. You may need to adjust print orientation in your slicer to be able to print it without support.
These are custom front lens caps designed for the Pentax UD 9x21 binoculars. The original binoculars do not come with front lens caps, so I created this model to provide proper protection for the lenses. Features: Designed to fit snugly…
My first ever CAD project. I couldn't find an STL for these anywhere online, so I slapped this together in freecad. I used a 0.25mm nozzle to get this to print well because the part is so small. I don't know how well it would work with…
![Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR](https://media.printables.com/media/prints/1116201/images/8431782_befdcc04-f9f2-4a85-bdd8-38d52b944702_41af4cad-e170-4f1c-aa6a-d68827a15950/p18-135-01.jpg)
