Milwaukee Belt Hook Hex Bit Box plus Slip On and Clip On Belt Bit Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1/4” Hex bit box designed to be fitted with Milwaukee tool belt hook plus a slide on and clip on version
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 1/4” Hex bit box designed to be fitted with Milwaukee tool belt hook so it can be worn on a belt. Box and bit holder are a close fit, I printed this in TPU, though it should work in any filament, perhaps needing a bit of finish work afterwards. There are three mounting holes but only the center one is really needed. To mount the Milwaukee belt clip, use an M2x12mm screw and nut. I used M2 cap screws, the allen wrench making installation easier. For added security, the other holes will accept the same screw. The box will accept hex bits up to 2.25” long.
There are two more belt worn bit boxes here, one made to slide over belt, the other to clip over belt.