1 / 3
X-shot MPP Stock-ish Stock
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shorter, Fixed Stock for the X-shot Motorized Piston Pump
- Ocena
- 4,875 / 5
- Polubienia
- 111
- Pobrania
- 397
- Wydruki
- 9
- Wyświetlenia
- 2874
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 9) (Komentarze: 35)Remiksy (6)Kolekcje (150)Powiązane
A toolless, fixed stock that reuses the stock battery door locking system. This version shortens the length of pull to just over 13". Other than gluing the ‘grill plates’ to 'retainer' all the assembly remains toolless, held together though a bit of friction.
Fits same size/larger batteries, possibly the long tube ones, don't have any to physically test with.
A .step file is provided if you want to widen the ‘retainer’ piece to fit even larger batteries, or whatever else you want.
CHANGELOG
- 8/8/25 - Removed integrated locking nubs. More trouble than they were worth, still holds together without it. Mostly to join the two sides and hide the seam anyways. Thickened the grill plates, along with the faces connected to the retainer by 3mm, which should prevent the retainer from snapping. Shrinks the battery size by a little bit.
HARDWARE NEEDED
- Some sort of glue
- No Additional Hardware
PRINT SETTINGS
- Supports are not required; overhang listed below could be supported, but functionally remains the same without it.
- You'll need a brim if your bed adhesion isn't great.