1 / 3
LEGO Part 6574 - Gear Rack 1 x 2 with 2 Tow Ball — zdjęcie 1
1 / 3

LEGO Part 6574 - Gear Rack 1 x 2 with 2 Tow Ball

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

LEGO Part 6574 to print. https://www.bricklink.com/v2/catalog/catalogitem.page?P=6574 CHECK NOTES BEFORE PRINTING.

Ocena
5 / 5
Polubienia
5
Pobrania
44
Wydruki
1
Wyświetlenia
184
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

NOTE BEFORE PRINTING:

  • Part does not have the big groove at the bottom as the original, keep that in mind
  • Do not use brittle filaments (PLA…), but something with a bit of flex like PETG or similar.
  • Number of perimeters: 7
  • Print it with the teeth pointing up at exactly 9,6754625° so the flat spots on the towballs are flat to the print bed (look at the 3rd picture)
  • Supports ON
  • You may need to do a bit of post processing with sandpaper to round off any sharp edges around the tow balls and gear teeth

 

This part is getting rare and expensive, so I decided to try 3D printing it even though I may break it more often than usual. With a bit of post processing part works almost like the original, but doesn't have the big groove at the bottom.