1 / 3
LEGO Part 6574 - Gear Rack 1 x 2 with 2 Tow Ball
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LEGO Part 6574 to print. https://www.bricklink.com/v2/catalog/catalogitem.page?P=6574 CHECK NOTES BEFORE PRINTING.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 44
- Makes
- 1
- Views
- 184
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
NOTE BEFORE PRINTING:
- Part does not have the big groove at the bottom as the original, keep that in mind
- Do not use brittle filaments (PLA…), but something with a bit of flex like PETG or similar.
- Number of perimeters: 7
- Print it with the teeth pointing up at exactly 9,6754625° so the flat spots on the towballs are flat to the print bed (look at the 3rd picture)
- Supports ON
- You may need to do a bit of post processing with sandpaper to round off any sharp edges around the tow balls and gear teeth
This part is getting rare and expensive, so I decided to try 3D printing it even though I may break it more often than usual. With a bit of post processing part works almost like the original, but doesn't have the big groove at the bottom.