Pittsburgh Penguins Logo Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Pittsburgh Penguins Logo features a spot in the back to house a 10mmx3mm Magnet!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pittsburgh Penguins Magnet!
This model was originally designed as a test for myself while using a new CAD program. I was able to faithfully recreate the Penguins logo and place a small hole in the back to house a 10mm x 3mm magnet. Each different color of the logo is at a slightly different height, making it easy to color in a slicer.
This model is designed with multi-color printers in mind. That means it is not optimized for single-color printers. You could conceivably go in and place a pause before each of the color changes would happen, but this method would be cumbersome at best.
Recommended Print Settings:
- 0.2mm Layer Height