1 / 5
Prusa CORE One/+ MMU3 3-Way-Splitter COLLET (compatible with Lite version) — zdjęcie 1
1 / 5

Prusa CORE One/+ MMU3 3-Way-Splitter COLLET (compatible with Lite version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prusa CORE One MMU3 3-Way-Splitter FESTO, avoids swapping tubes between MMU3 and regular use.

Ocena
0 / 5
Polubienia
6
Pobrania
34
Wydruki
0
Wyświetlenia
203
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version.

Since the length of the original PTFE-Tube is 450mm the length of the two PTFE-Tubes is as follow:

  • 1x PTFE Tube 4x2.5x40mm (between MMU3 and Y-Splitter)

  • 1x PTFE Tube 4x2.5x357.3mm (between Y-Splitter and Extruder)

Additional parts required:

Print Settings:

  • print in upright position as shown in the shared picture

  • Material: Prusament PETG

  • Print Settings: 0.1mm FAST DETAIL

  • Infill

    • Fill densitiy: 100%

    • Fill pattern: Rectilinear

  • Skirt and brim

    • Brim width: 8mm

  • Support Material

    • no support material

Tagi