Prusa CORE One/+ MMU3 3-Way-Splitter COLLET (compatible with Lite version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa CORE One MMU3 3-Way-Splitter FESTO, avoids swapping tubes between MMU3 and regular use.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version.
Since the length of the original PTFE-Tube is 450mm the length of the two PTFE-Tubes is as follow:
1x PTFE Tube 4x2.5x40mm (between MMU3 and Y-Splitter)
1x PTFE Tube 4x2.5x357.3mm (between Y-Splitter and Extruder)
Additional parts required:
4x Collet
Print Settings:
print in upright position as shown in the shared picture
Material: Prusament PETG
Print Settings: 0.1mm FAST DETAIL
Infill
Fill densitiy: 100%
Fill pattern: Rectilinear
Skirt and brim
Brim width: 8mm
Support Material
no support material