Magnetic hygrometer bracket for Spool Tank by Printer Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to sit above the unused central slot for filament guide.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple magnetic bracket that can be easily removed to clear the door opening for pulling the spools, and just as easily placed back.
Designed for very common panel mount rectangular 48 x 28 x 15 mm hygrometer/thermometer that can be found in a variety of places, including Amazon (here, here or here).
Mounts to the steel wall of the Spool Tank by Printer Box with two round magnets 10 mm D x 5 mm H with 3 mm+ countersunk hole that can be found on Amazon (here). My magnets are actually 4.6 mm high, so if your magnets are more true to declared dimensions - hygrometer will sit 0.4 mm deeper into the tank - which is not a big deal. Magnets are held in place by two 3x8 flat head screws.
The bracket is designed to sit on top of and be center relative to the blind central plug without PTFE holder (search for 0ST_ptfe_holder_no_ptfe_v1 in Downloads section).
Should you want to adapt it to other magnets, or mounting location - STEP and Fusion 360 files are included. Fusion project is parameterized - just change the parameters and see if anything needs to be tweaked slightly.