1 / 3
Rat Rig V-Minion Thicker Z endcap and cutout pillow block
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thicker Z end cap so the tip of leadscrew does not protrude when switching to LDO motor with integrated lead screw.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 951
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (33)Powiązane
For use with integrated lead screw stepper LDO 42STH40-1684L300E or equivalent…or if you just want a stronger cap.
Added in a Pillow block with the center cutout for the 8mm leadscrew.
Edit 3-6-2022: updated z cap to R2 with different chamfer angle to print better. Changed cutout pattern on bottom slightly.