1 / 4
One Piece - Straw Hat Pirates - Tony Tony Chopper Jolly Roger Clock Face with Clock Mechanism Housing! — zdjęcie 1
1 / 4

One Piece - Straw Hat Pirates - Tony Tony Chopper Jolly Roger Clock Face with Clock Mechanism Housing!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tony Tony Chopper Jolly Roger clock face with cutout for a clock mechanism to slide in the back

Ocena
0 / 5
Polubienia
2
Pobrania
33
Wydruki
0
Wyświetlenia
121
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

One Piece - Straw Hat Pirates - Tony Tony Chopper Jolly Roger Clock Face with Clock Mechanism Housing!

This clock was originally designed as a way to challenge myself. I had just done the Luffy Jolly Roger for my buddy (also available on Printables), and I liked the look of this design. I know next to nothing about the show, but I thought this design was the coolest, so I chose it to make a clock out of. I never got around to printing it, so all I have are screenshots of the colored model. 

Due to copyright and IP laws, I'm not able to sell these clocks, so I'm giving the files away to anyone who wants them for personal use only. There is an .stl and a .3mf file available. I'd recommend tweaking the settings on the .3mf to fit your printer!

The clock face is designed to fit a specific clock mechanism that I purchase from Amazon. The item is named “EMOON 15 Pieces Clock Mechanism Replacement Kit with 16 Pack Hands, Silent Sweep Clock Motor Kit Battery Operated for DIY Repair Replacement (Thread Length 1/2 in)” While the clock is designed to fit this specific clock mechanism, it does also fit many other mechanisms available online. I cannot guarantee other mechanisms will fit, however. 

Clock Hands included are also designed to fit on the above specific clock mechanism, and it is not very likely they will fit on other mechanisms.


Recommended Print Settings:

  • TEST PRINT TO BE CERTAIN YOUR CLOCK MECHANISM FITS THE HOUSING
  • 5% Gyroid Infill
  • Grid-style supports to fill the clock mechanism void.

Tagi