1 / 3
Equalizer Fader Knob [Peavey XR-600B Mixer Amp] — zdjęcie 1
1 / 3

Equalizer Fader Knob [Peavey XR-600B Mixer Amp]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printable knob for the Peavey XR-600B Mixer Amp

Ocena
0 / 5
Polubienia
2
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Standard Digital File License

3D model description

An equalizer fader knob designed after a fabric made original for the Peavey XR-600B Mixer Amp. They are not perfect on the micrometer, but close enough not to be noticed by an eagle.

NOTE:

  • The hole is fitted for the type of fader lever which can be found on the "Peavey XR-600B Mixer Amp" equalizer potentiometers.
  • It's not designed with filament printing in mind so take into account that I haven't tried if it can be printed with filament (the measurements are very exact, so filament printing might risk changing that). I do doubt that it would be a problem though since it prints excellently in resin on 0,05 mm layer height (your average FDM printer with 0,1 mm would in this case half the "resolution").
  • The supported file is designed for resin 3d printing.

3D printing settings

  • "Rough" size: 13 (L) x 7 (W) x 13 (H) mm.
  • Hole size: designed after the "Peavey XR-600B Mixer Amp" equalizer potentiometers.
  • With a slight slope up towards the top.
  • The sides are beveled and the top is ribbed to match the original.

Tagi