1 / 3
Equalizer Fader Knob [Peavey XR-600B Mixer Amp] — image 1
1 / 3

Equalizer Fader Knob [Peavey XR-600B Mixer Amp]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printable knob for the Peavey XR-600B Mixer Amp

Rating
0 / 5
Likes
2
Makes
0
Views
96
Reviews
0

Updated at source:

Model information

Category
Audio
License
Standard Digital File License

3D model description

An equalizer fader knob designed after a fabric made original for the Peavey XR-600B Mixer Amp. They are not perfect on the micrometer, but close enough not to be noticed by an eagle.

NOTE:

  • The hole is fitted for the type of fader lever which can be found on the "Peavey XR-600B Mixer Amp" equalizer potentiometers.
  • It's not designed with filament printing in mind so take into account that I haven't tried if it can be printed with filament (the measurements are very exact, so filament printing might risk changing that). I do doubt that it would be a problem though since it prints excellently in resin on 0,05 mm layer height (your average FDM printer with 0,1 mm would in this case half the "resolution").
  • The supported file is designed for resin 3d printing.

3D printing settings

  • "Rough" size: 13 (L) x 7 (W) x 13 (H) mm.
  • Hole size: designed after the "Peavey XR-600B Mixer Amp" equalizer potentiometers.
  • With a slight slope up towards the top.
  • The sides are beveled and the top is ribbed to match the original.

Tags