Print in Place Convertible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy-to-print, stylized model of the 1958 Chevrolet Impala. No supports required. Wheels spin.
- Ocena
- 4,8 / 5
- Polubienia
- 296
- Pobrania
- 1660
- Wydruki
- 22
- Wyświetlenia
- 5564
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is Print-in-Place design was designed to be printable on any FDM printer. Thanks to the use of bridges and 45° overhangs, this model shouldn't be too challenging. The design was heavily influenced by the 1958 Chevy Impala.
The length is roughly 140mm, but when turned 45°, it should fit even onto a 12x12cm buildplate.
Since I'm releasing this design for free, any tips are appreciated (or you can check out some of my other designs ;D)
Happy printing!
Caution: Sharp Edges - Not suitable for children under 9 years due to breakable plastic. Adult supervision required.