External Cooling for MeLe Quieter 4C Micro PC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
External Cooling for this fanless Micro PC design to keep temperature down even under heavy load.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
The MeLe Quieter 4C is a fanless Micro PC design that dissipates heat via its case. In use the case gets pretty hot which is intended and works as expected.
This, Art Deco inspired fan duct helps to keep the case cool in situations where more performance is required and size is not as important. The base is a 80mm 5V case fan powered by USB.
Using this, temperature drops of 30° C have been observed - no more thermal throttling and higher TDP settings are possible. Also, it looks cool. Try using tranparent filament and a LED fan if you feel fancy ;-)
Print using PETG or ASA because PLA might not be suitable at temperaturesof of more than 70° C if you forget to turn on the fan for example.
Printed with a Prusa Mini+ with input shaping and 0,15mm Layer height. No supports necessary.