Bullitt Headlight Frame Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to have my headlight mounted to the frame above the fork instead of on the fork for various reasons, but…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to have my headlight mounted to the frame above the fork instead of on the fork for various reasons, but couldn't find any real solutions, so I made my own!
The mount is attached to the two holes on the gussets between the head tube and the frame with two m5 screws, a couple of nuts and washers. The light itself is clamped wih another(longer) M5 screw and a nut that is held in place within the mount, negating any need for a spanner to be used.
This is a rough design and could definitely use some polish, but it works!
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10-20
Notes:
Print with thick walls to make it strong.
Category: Other