Bullitt Headlight Frame Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to have my headlight mounted to the frame above the fork instead of on the fork for various reasons, but…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
I wanted to have my headlight mounted to the frame above the fork instead of on the fork for various reasons, but couldn't find any real solutions, so I made my own!
The mount is attached to the two holes on the gussets between the head tube and the frame with two m5 screws, a couple of nuts and washers. The light itself is clamped wih another(longer) M5 screw and a nut that is held in place within the mount, negating any need for a spanner to be used.
This is a rough design and could definitely use some polish, but it works!
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10-20
Notes:
Print with thick walls to make it strong.
Category: Other