Counting matching models…
Just a handy small piece which allows to mount a Headlight straight to the BBB Stems that are compatible with the GoFix Mount from BBB. Listed models on BBB website: BHS 09, 37 und 38Di2 but also fits the Actionstem BHS-52 as you see For…
Arm for headlamp level sensor. fits 10mm ball. length from 60mm - 150mm, measured from senter ball to ball. STEP file included.
Made this to fit a 1999 Fleetwood American Tradition motorhome but it should work for any other application. You just need 2 screws to clamp the 2 pieces together.
BMW E24 Clamp for Headlight cleaning system. This part is no longer available. 61661362211 61661362212
Printing Mine are printed in PETG, they may warp on super hot days, time will tell. ASA or PA6 might be better long term options. The ones on the bike I am fixing are rusted and cheap and ugly. This seemed like a fun project for a boring…
Left Headlight Duct 3d .STL model for Honda CIvic EJ/EK (facelift version: '98-'00). Deigned specifically for K-Swapped cars with air filter on left side. Mounting holes to be drilled upon fitment. Package includes: -Entire headlight as a…
When replacing a bulb in the headlight of my MINI, part of the headlight cover broke. So I created a model to print as a replacement part. I printed mine from PETG and it works great. The seal fits perfectly into the part. Material:…
this is an adapter bracket you need to make the awesome morimoto M-LED 2.0 to fit inside your TYC brand projector headlights for 2013-2018 ram and 2019-2020 ram classic Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
This is a custom 3/8 drive deep socket intended to fit the head of the lower, outer, headlight stud on a Jeep Grand Cherokee ZJ that is twist locked into the header panel. the hex on the end is a 19mm and the body is a 26mm hex. I printed…
A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…
I printed this adapter after the ring clamp of my mount broke. Seems to be sturdy. Printed in ASA, 0.2 layer height (important, the model is designed specifically for this layer height). 3 perimeters and 45% infill.
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Used in various Mercedes-Benz car models from 2007 up to 2016 in E-Class C207, A207 and C-Class W204, S204. If you need…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…
Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or debris. When assembling, apply a generous amount of thick grease to the joints to ensure smooth movement and…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…
Most of these pieces are NLA or have a long lead time from Mazda. all the bushings are quite straightforward. Print solid from a heat resistant plastic like ABS or PETG. Bushing 2 there are 2 variants, one with threads and one without.…
This parts are intended to be used as replacement for the head light inserts on the ActionBikes brand, Willis Jeep. Can be fitted with LED lights. You are going to find the .step for download too if you want to modify this part. Please…
A replacement for the original headlight bracket. Stable and expandable. In my case, I installed it on a 2025 Hiley Tiger Evo GTR. However, the shape of the seatpost allows it to be mounted on other scooters from this brand. Examples:…
I took the work done by https://www.printables.com/@AJQuick and did some adaptations, This I did several years ago, but never published. The model has been on my wife car since 5+ years without any incident Since I did not wanted to use…
Use your headlights as rock lights when removing the front bumper of the Axial SCX24.
I took the work done by https://www.printables.com/@AJQuick and did some adaptations. This is the second adaptation I did, but feed mostly from my previous model (which I adapted from AJQuick). I needed to do a second adaptation because…
This is probably a very niche problem, but who knows. Someone may find it useful. So I bought new headlights for my 2013 Grand Cherokee and they had this space for a bulb but my car didn't have a bulb to go there. I didn't want to just…
Headlight grommet/clip for Mitsubishi models. Designed directly from the OEM part off my 1995 FTO. Part number MU810518 This may fit: Aspire, Colt, Debonair, Delica, Diamante, Dignity, FTO, GTO, Galant, L200, L400, Legnum, Pajero Mini,…
A friends car had a bad conversion on his Nissan Skyline R33G GTST. I mocked up a new adapter plate to easily attach any projector lens. Multiple file types are attached so you can modify for the lens you got. I know china makes 1000+…
Headlight mount for Mitsubishi Outlander 2011, install on top of the original mount
If your Headlight wiper endstops are all chewed up, here are some replacements. Made them for a friend. no Idea if it fits to every Volvo. I printed them in TPU with 0,4mm nozzle and 4 perimeters
i made a headlight adapter to fit a 7 inch led reflector headlight in a honda CB650F CB900F CB919F from 2002 to 2006. printed in TPU 95A 4 walls 4 bottom 5 top
Nissan Almera Classic (B10) Headlight Cover — Adapter for LED Bulbs with Heatsink !!! Please pay attention! I did not receive any feedback from the customer during the execution of the model. There may have been errors in the modeling.…
This model includes two versions of the same motorcycle headlight housing: Original design (older workflow) Redesigned version (optimized workflow) Both models are functionally identical, but the design approach is completely different.…
I made this to resolve the issue of stripped out holes on my AW11 MR2 headlight bucket fastener holes. These utilize and require M4x6mm brass heat-set inserts to make a custom fastener that easy to install and lasts. Simply print the…
All three BMW F30 bumper covers were scanned from cars of different revisions, so one of them should definitely fit you) There is also an "eng" model, which is a scan of the 3rd lid.
This is a model of cover for Cirtoen C4 B7 2010-2014 headlight with 72mm hole (smaller one)
Someone in my family has this light, and the hinge seems to be a weak point as the part broke. I designed and tested a replacement part. I will be surprised if anyone that both needs this niche part and thinks about searching for it…
This is our new project. We restaured our old headlight, so we removed glass from turn signal lamp and printed it as VW logo. Also we sprayed arround dimmer in black. This is file for one headlight and for the second one you just do…
This part was not scanned from the original part. I tried scanning it but the part was broken beyond that. So this was manually measured everywhere and designed from scratch. It fits the headlight pretty well. I printed it with ASA and it…
Why? I fancied more lighting on my 2024 Royal Enfield Himalayan 450 and I also didn't like the buffeting from the turbulence created by the original windscreen, so this model is half of a headlight mount that bolts directly in place of…
Universal ESK8/Skateboard/Longboard Accessory Mount This mount is designed for skateboards and longboards to support accessories that typically use standard bicycle handlebar mounts , including headlights, taillights, and action cameras.…
A replacement headlight cover for Audi TT mk1 . This part has the coresponding gasket too. Main cover recomandations: PETG or better, 4-5 perimeters, 25%infil, supports, print it the way its oriented for maximum stenght. Gasket…
About We do an annual trip that includes some road riding and occasional after dark shenanigans. This year we are all riding small bikes. My KLX125 didnt have a headlight, so I made the necessary parts to fit one. This will work with…
Acerbis Elba Adapter Bracket to Hold LG885 Low/Hi beam headlight
This is a custom bracket designed to replace the stock headlight on the KTM 640 Adventure (2007) with auxiliary lights from Lada Vesta (WD-024) featuring a cutoff beam pattern. In this setup, the Lada lights are used as the main headlight…
Like OEM reproduction of the factory headlight rear cover for all 04-05 Imprezas the “blob eye”, I've added 3 varieties and the gasket that sits between it and the headlight housing. This may fit other cars but I can only confirm the…
I wanted a headlight that pointed in the direction of the wheels. This bracket mounts to the steering stem cover with three 10mm nuts and bolts. There are two small backer pieces not pictured that together hold the bracket on by clamping…
I wanted to attach some lighting to my Tarmo5 and decided to add it at the shock mount. The model “SHOCK MOUNT - A01_Front” has a 8 mm through hole and the other one 6 mm. For my light set this are the right sizes.
Simple H1 and H7 socket covers, printed it to safely transport a pair of headlights. A set of blank and a set of rectangles to fit H1 (12x8mm) and H7 (17x10mm) sockets. (Make sure it fits yours) It's porbably easier to just use some burnt…
print in ABS with 100% infill. This is the part that connects the headlight to the frame with pivotpoint. Replacement for original part
Mount for installing the Wolf King GTR headlight on the Inmotion RS. I think that this mount makes the installation a little cleaner and easier. It can be installed using the three bolts from the original RS headlight mount. The holes for…
I needed a good looking Case/Housing to mount my cheap Amazon LED Headlight, so here we go! I recommend printing in PETG, or ABS. The Light itself doesn't generate enough heat for the part to deform, the Sun very well will if you use PLA.…
On my 2016 Jeep Grand Cherokee when the headlamp burns out the manual had me take the grill and front end off of the automobile to simply change the bulb. It took 3 ½ hours to change a single bulb, which is ridiculous, I've changed a 3…
I bought cheap 3 leds modules and added in sets of 3, connected them in parallel and got this LED headlamps that are very bright and usefull.
Got a Honda Motocompacto. Didn't like that there are NO FREE MODELS to upgrade this plastic toy scooter! Here are some press-fit headlight shrouds for the Motocompacto headlamp assembly. Will require some sanding of sharp edges to force…
Print the main body on end, and the tab on its side for best results. Use M3 heatset inserts in the body, and countersunk screws to secure the tab. I prefer ASA but PETG would likely serve well. I printed at 100% infill Category: Sport &…
Bugeye Zuma conversion to 6" LED lightbar. Will require a bracket behind it be cut or hammered to fit. Modeled for 6" Nilight LED lightbar from Amazon(link below). Included Blend file for headlight bezel as well as a bracket that fits…
20-40% infill 0,2 layer with support. ~2hours to print. give a like and have fun to save money :)
Крепление китайских LED фар в штатный бугель. Кольца крепятся на 4 винта M3. В сами корпуса изнутри вплавлены резьбовые втулки с фланцем. Первый вариант делал с крупной пластиковой резьбой, но задолбался подбирать зазор чтобы нормально…
Headlight Kit for Dummy 13 Dirt Bike Add some illumination to your playtime! Designed to power a headlight LED, this sleek design fills the void where the motor would go by incorporating a battery pack in it's place. This works off of 2-3…
Wedge for fixature and lower the vibrations on VW Passat B5 headlights. Rebuild for VW's 3B0941042 which isn't produced anymore
Buell Lightning headlight assembly without the reflector. I may add this at a later date. The model is dimensionally accurate for every feature I was able to measure. This headlight assembly design was used for 883cc (xb9) and 1203cc…
A mount for the triangular shaped battery for Light & Motion Seca lights. Printed in ASA.
A small adapter to convert the dual M4 bolt pattern of the OPL5 4" headlight to a single M10 bolt for mounting to a motorcycle style headlight fork mount. May fit other small headlights with the same bolt pattern. I printed mine in TPU to…
Headlight cover for car BMW e90 i made from measureing an original you may need to adjust on long side to be a bit shorter but i printed it as is and it worked fine, printed it on elegoo mars 3 with abs-like resin.
Astra J headlight cleaning system nozzle holder with the part numbers 13258411 and 13258412
I wanted to mount my GoPro to record videos while cycling and I also didn't like how my headlight was mounted to my handlebars (the OG one is rubber and was stretched to the point where I thought it would fall off) so I made this. A quick…
Needed parts list: 1X Baja Designs Squadron Light Pod Sport or Pro (Driving/Combo) 1X High/Low wiring harness from Howling Moto 4X 12x3mm screws to hold the shroud to the plate You will use the bracket and hardware that comes with the…
I designed this for a friends Serfas bicycle headlight so that he could mount it on his helmet. We did it in ABS. I designed it with the exact measurements of the original, (the black one in the photo). The three petals can be heated and…
I have two of those headlights and both of those the bracket broke (see in the picture) and i didnt want to throw those two perfectly fine working headlights away. I dont have a lot of experience modeling, so this is the first time…
Convert non functional headlights to functional headlights This is a headlight mod for the Thumper model found here- https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc This build was designed for…
You can modify it if you want, it is definitely not perfect, but it is a pretty accurate copy of the original.
Cover plug for removed headlight wipers on Volvo S70, V70 1st gen. Contains a cavity to be able to fit even when the axle/motor assembly has not been removed entirely but only cut flush with the front using a Dremel or such. Disconnect…
An adapter that allows you to use your headlamp as a bicycle light using the Garmin quarter turn mounting system. This practical solution lets you repurpose your headlamp for cycling while maintaining secure and easy attachment to your…
A cap for the Hyundai ix35 headlights with the corresponding silicone gasket. Print the cap in ASA, ABS, or another material capable of withstanding higher temperatures. The "Gasket [Silicone]" files are not for printing, they are just a…
Clio 3 RS 200 Headlight Dust Cap / Cover for extended globes i.e., LED's with heatsinks. Print out of TPU.
These are backing for the R170 SLK Deco aftermarket headlights to replace the rubber membrain backing in case you need more room for something like LED headlights. Would recommend printing in ABS and then putting a screw through the print…
It fits well on Renault Scenic III 2014. Please check dimensions and resize if required. Print using ASA, TPU, PP or other similar filament. If you would like to support me - you can buy me a coffee :) Please try to share photo of your…
Headlight washer covers for Audi A6 C5 allroad. Re-modeled based on original 4Z7955275 part. The thickness of hooks (the ones that latch on the washer nozzle) is slightly increased for durability. The scale is OK. See comparison photos.…
I believe most people owning a MK3 VW Golf is familiar with these. Either by overtightening or simply due to the part being too old, these end up breaking and making the headlight feel “loose”. Tried with ABS myself. ASA should work, I…
Over the years, the fastening clips on the covers for the headlights become brittle. These wedges can be used as a replacement to close the cover firmly and watertight again. The wedges are suitable for Peugeot Expert and Traveller from…
Allows you to fit an H13 bulb into your H4 headlight housing. I printed in PETG, 15% infill, minimal supports and it worked great.
Attached the mounts for a Seat Leon 2. Hope it work well for you.
use spiral Print for the single walled versions Also tapered version can be used with ball joint arm
Most headlight housings are made of PP T30, which is polypropylene and 30% talc. To do this repair properly, use polypropylene filament to print these parts. Polypropylene Carbon Fiber filament is available on Amazon and might be worth…
This is a Mitsubishi Delica D:5 headlight cover. Car lamp. Это крышка фары Mitsubishi Delica D:5 Лампа автомобильная
Very specific to this make of headlamp but may be of use to somone. Rather than putting this in the bin I made a new bracket. PLA and print time around 1 hour with 4 walls for strength. Will need supports to ensure the hole for the button…
Frontbar with headlights for Landy Mini. Headlight print twice for left and right side. Mount using glue. Best result when headlight printed in transparent filament. Headlight's covers shoul be printed with the grid facing the printer…
Adapter to mount a bike headlight to an ahead spacer mount. I have a Supernova Spacer Mount and a Busch + Müller (bumm) IQ-XS headlight. Could also fit to other combinations. Print with support on bed and model. I used PLA, but for…
This is the BMW E39 headlight short adjuster with all the injection mounding features removed. I recommend PETG or ABS
This is the BMW E39 headlight long adjuster with all the injection mounding features removed. Place the part with the biggest flat part on the printbed, the ball cuts also indicates this. I recommend PETG or ABS and as much as possible to…
This is an adapter to mount a Serfas TSL-S250 bicycle headlight to a Planet Bike mount. The adapter is designed to remain attached to the headlight when it is removed from the bicycle. Print instructions Category: Sport & Outdoors
There was only left, I drew right and left. Not tested. Maybe a few corrections needed.
The mounting clips for each headlight of the Ford Transit MK3 (up to 1991) consist of three pieces: two upper clips and one angled lower clip. The angled clip allows for some movement to adjust the headlight screws. Since these clips are…
Reinforced Version This is the reinforced version of the headlight mounting clips for the Ford Transit MK3 (up to 1991). You can find the original model here: […
