H4 Headlight connector adapter cover male plastic sheath H0518-3P / DJ7033-7.8-11 (updated)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This is a reproduction of part [H0518-3P / DJ7033-7.8-11] by the 3B auto parts manufacturer for use with H4, 9003, and HB2 7.8mm spade terminal headlight wiring. Original part:
For the matching female part [H0516-3P / DJ7033-7.8-21] see:
- http://www.iiib.biz/en/proView.asp?id=551
- https://www.printables.com/model/428471-h4-style-headlight-plug-adapter
Updated v2 has larger openings to make it much easier to get the blades in place.
PLA any is not recommended for automotive application, but PETG, ABS, ASA, etc are generally OK for parts that are not adjacent to a hot engine.
If you have trouble fitting the blades in-place, use a hair-dryer to soften the plastic for a few seconds before sliding them in. Sometimes the blade locking tabs will flatten down too much, so you may have to get a pick to pry them out so they actually lock. The brand of blade you use matters as some are much softer metal than and don't spring back once flattened.
If the community requests, I can adjust the model to have access holes so you can manually push the locking tabs out after sliding the blades in.