Counting matching models…
PiMesh4 is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print. This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2…
A box for your NanoVNA-H4. Includes room at the SMA connectors for you to leave your adapters on the VNA if you like (I have BNC adapters on mine). Fits the SMA calibration standards and has lots of storage room under the NanoVNA and in…
By the Emperor all the heretics will burn! See GBGHcosplay's Sisters of Battle Armor here: https://www.facebook.com/GBGHcosplay/ Much thanks to LimbSmyth for the base wax seal model. Print Settings Printer Brand: Wanhao Printer: Wanhao…
This stand has been designed to fit the new HackRF Portapack H4M but it will also fit H2M and other thin H2 models. You can charge your portapack while it's in this stand, as there is room to fit the cable through the hole in the back,…
This is a case designed for the PortaPack H4 & H4M https://github.com/portapack-mayhem/mayhem-firmware/wiki/PortaPack-Versions#new-h4m-mayhem-edition Originally based off of https://www.thingiverse.com/thing:4260973, but updated for the…
Compatibility Ph3 horizontal or Ph4 vertical oem fiat 500/595 vents. Print Print one with vertical symetry to get the 2nd side. Use ASA or ABS for hot days… For phase 4 only, you will need to apply a scale multiplayer because the oem…
Remix of the rugged box for the H4M Portapack. Uses the original foam that the device comes with. Make sure to print 2x of the latches. Uses six M3x30 screws. Attached are also blank lids if you would like to add your own logo. Excellent…
Das Modell wurde von mir erstellt, um mein eigenes NAS zu konstruieren. Es ist nicht zu 100% identisch mit dem Original aber die Außenmaße passen soweit.
My friend needed extra HDD/SSD trays, as his (bought used) NZXT H440 computer case only came with one. So, I measured the original and made this to fit the tray slots in the case. Fits both 2.5" and 3.5" disks. It's available in three…
Grimdark warring terrain
To assemble this case, you need several additional parts. Parts list: 1 X 92mm x 92mm x 14mm fan (Noctua NF-A9x14) 1 X 40mm x 40mm x 10mm or 20mm fan (Noctua NF-A4x10 or Noctua NF-A4x20) 1 X LOP-200-18 or EPP-120S-15 PSU Up to 4 X SATA…
Description This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have…
This case is for Odroid-H4 series. For the better cooling, I added a 40 mm fan on the side of case. Also, to make the assembly easy, I used some threaded heat inserts. You should not need any supports to print these parts. *Currently, I'm…
This is a two part stand for a NanoVNA H4. The H4 is a bit thinner than the V2. This stand requires 2 prints of the bracket to be made, these brackets then slide onto the H4. They have lips on them to stop them from flopping about. The…
Warhammer 40,000: 11th Edition – 8" Deepstrike Gauge Stop second-guessing your reinforcements! This is a dedicated 8-inch measurement tool designed specifically for Deepstrike maneuvers in the upcoming 11th Edition of Warhammer 40,000 .…
Double-sided crossing track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight…
Mecpow X3 Pro Honeycomb adapter Hello, I've modeled and printed adapter, which helps in placing honeycomb H44 (44 cm x 44 cm) under my Laser Engraver Mecpow X3 Pro. I am not sure if it can fit to other models, but if I get information in…
- Use TPU filament - Shimano Cleat Covers are easy to use and can help you protect your cleats and improve your grip - To install them, simply slip them over your cleats and make sure they fit snugly - You can remove them by pulling them…
An Inquisitorial Rosette such as worn by the holy ordos. I include a split model for easier printing. Category: Costume
A case for storing a 9003/H4 bulb Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.1 Infill: Doesn't Matter Filament: Spool3D PLA Category: Automotive
Needed a mount for some 1/2" PVC I got from ace. Used decimal inches because the imperial system is ridiculous and I refuse to use fractions when measuring things. Also I'm an engineer not an architect so decimals all day Customized…
I used these to connect to 4x6" LED lights to the custom harness I make for customers. Bend the locking tab on the 7.6mm connector to lock into the adapter. Parts required: 7.6 mm female spade connector (some list as a 7.8) wire and…
This is the ultimate HackRF H4M case with many improvements: Designed for 3d printing, with larger tolerances than the original case (which was made for injection molding with very tight tolerances) Added EXT - MIC and ON - OFF text on…
Encoder dial in Portapack H4M is far from perfect. This little add-on improves scrolling experience a lot. It is slimmer that the wheel made by @Farlei and does not restrict access to directional buttons as much. I printed mine on…
This is a 3d model of the hinge cover on my SRH440 headphones, which was completely broken after a rough trip. alternative keyword: srh-440
Frizerator H4A1 Frisbee Launcher Pistol Remix of Dave Delay's Fizerator H-4, https://www.thingiverse.com/thing:693465 New feature of the remix: Powered by easily available rubber bands (30 mm ... use 2 or 3 to achieve desired power).…
This is a medium height stand for the HackRF H4M Portapack. Most right-angled USB cables will fit. There are 4 versions: Stylus holder only MDK cutout only Stylus holder and MDK cutout (recommended) No stylus holder and no MDK cutout I…
Background: I was building a cart for my DeWalt 12 gallon Stealthsonic shopvac and found that the supplied hose for the duststopper was too short if I mounted it on top of the vacuum. This is a right angle (elbow) adapter for the shopvac…
I like the original design by hopskipper but I only needed a case for 3 batteries . So I remixed it in Tinkercad and here it is. Print Settings Printer: Anycubic i3 Mega Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Notes: Print…
A simple adapter to install 120mm fans on Odroid H4 SBCs. I printed with one of the cheapest PETG plastic options. My print settings: 0.25mm layer height. 3 perimiters. 0 top and 0 bottom walls. 15% infill. Rectilinear pattern.
It spreads the tension of big/heavy antennas (W100RX2 added since its a great antenna and i have it now) away from the SMA onto the case. I got inspired by https://www.reddit.com/r/hackrf/comments/1l9c72m/hackrf_h4m_antenna_mod/ .
Cheap and long-lasting repair of critical design flaw in Shure SRH-840 headphones. I've owned many pairs due to them all failing by snapping at the connection between the pivot block holder and the adjustment arm My one pair of SRH-940s…
Looking to turn your Odroid H4 Plus into a slick little NAS box? Look no further! This 3D-printed case snugly houses the board, provides decent airflow, and has built-in spots for drives—all while keeping everything nice and tidy.…
This is a 2mm add-on for the H4M scroll wheel with an extra grip texture. I printed it in PLA with 0.1mm Fast Detail in the MK4S. No supports needed. Should work with 0.2mm. But the texture could be affected. The add-on will make tapping…
osVAC Adapter for a 40mm hose.
Ersatzteil passend für Hurom Entsafter Spare part compatible with Hurom Juice Outlet Please publish your make, if done
i designed a front panel for the NZXT H400 and H400i. It mounts on the existing bracket that hold the original metal panel to the case. You will have to cut the opening on the bracket, i used a dremel (see pic 2) PS: it's my first model…
Made this for my taifun headlights to run 9006 LEDs because I didn't want to make a conversion harness. So far the base has been able to withstand the heat from the LEDs. Remove the bases that come with the 9006 LED either by twisting or…
Printed of PETG, with supports. Spare vacuum bag holder Philips VC-H4213E-14
This is a accurate model of the LDO-42STH48-2804 NEMA 17, created based of the drawing and realworld dimensions
Overview I was not happy with the existing solutions for MMCX adapters, so I made my own. This one uses a pcb mount mmcx connector. This model was also made with SLA or SLS printing in mind. I specifically had these printed in SLS Nylon…
This is a replacement drain plug for PARKSIDE VACUUM CLEANER PNTS 1400 E2/H4 PWD 25 A1 AND A2 /30 A1/ 30 B1
People were asking for one for the Porta Pro/KPH40 after the one for the KSC75 that I made. The philosophy is the same, limit tilt as little as possible, while keeping it easy to print and use. Flower grill can be found here: Make I…
My Tv has broken, and my mother has these Philips laying around but the foot was broken! 3dprint to the rescue!
osVAC neo F40H40-withSlipring + step + Fusion 360 I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist…
great tiny nas for odroid h4 plus Version 1.4 Improvements: Removed Fourth Standoff : The fourth standoff has been removed to eliminate interference with the RAM on the motherboard, allowing for a proper and secure fit. Power Button Hole…
Continuing organizing my tools and spares in tool boxes now a relatively small universal tool box in gridfinity style. Now I also added a lid with Bambu Lab logo to cover the 2x2 boxes. Easy to stack on other 2x2 gridfinity boxes. The bin…
easy print with PLA 0.2 mm and don't use support, because it's not necessary.
Hello brothers and sisters, So my Ford Transit is disintegrating before my eyes… started to replace crucial parts. This socket is for double H4 headlights, but I think works with h7 also. I recommend using same type of metal connectors as…
I love the idea of @Clough42 's Gridfinity Grids - Stacked for Printing , but there wasn't much info on how to actually get the printer to do the thing, and I was initially faced with some issues. Comments on that model showed that other…
Based on https://www.amazon.co.jp/Motors-Super-Power-Nema17-LDO-42STH48-2804AH/dp/B0CD1NMN5L
Baixe e imprima este arquivo para substituir a dobradiça da tampa da sua impressora GTMax 3D modelo H4! Especificações do Design: Compatibilidade : Impressora GTMax 3D modelo H4 Material recomendado : PLA ou ABS Instruções de Impressão:…
This model is very similar to my flipper dock. It uses the same 10mm 5-pin magnetic usbC cable. Unfortunately, you will probably need supports for this model, unless you have a printer that does really well with overhangs. My FDE/BLACK…
Materials list: 1 unit MKS H43 2 units DIN912 M3x18 2 units DIN912 M3x12
Printed on CR10V3 with Eryone black PLA. Nozzle at 195 and bed at 55.
Getting my tools and spares set up in tool boxes I started with a "gridfinity home" for the three nozzles 0.2, 0.4, 0.6. There is an existing gridfinity solution, but bin 2x3 and four nozzles which is too much for me, I stick with 0.2,…
This is a compact network attached storage (NAS) case for the Odroid H4+ (ultra) which uses an Intel N97 (faster variant of n100). Onshape: H4 NAS | NAS This case is designed to house four 2.5" drives (SSD/HDD), Odroid H4+(ultra), and…
Main points: 20mm PVC pipe for front, middle, and rear supports, while keeping the point of contact with the spool in the same place. Rear support made smaller on the bottom, to prevent scraping. Front and middle support width reduced to…
CPU cooler fan duct that forces it to draw cool external air. Created for the DeskMini h470 and Noctua NH-L9i.
Two different sized corrugated plate static mixers designed for use in 1-1/2" SCH40 PVC pipe. Category: DIY
This is intended to be the inside of a Necron vessel during Boarding Actions. The walls are compatible with GW terrain. There are 3 types of doorways and 5 types of walls provided. The Walls have been intentionally left blank in order to…
osVAC neo M40H40-withSlipring + step + Fusion 360 I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist…
Air Vent Controllers as seen in the Video Game Space Hulk Other items form this collection can be found here: Space Hulk Greebles - WH40k Collection by Vontragg | Printables.com Category: Buildings & Structures
This is a tall stand for the HackRF H4M Portapack. most USB cables will fit, and clock cables if they aren't too stiff. There are 4 versions: Stylus holder only MDK cutout only Stylus holder and MDK cutout (recommended) No stylus holder…
Cog Tokens – WH40k 11th Edition Battlefield Status Set Double-sided gear-shaped status tokens for WH40k 11th Edition. Covers all key unit states including the new Hidden mechanic. --- About I created a set of double-sided tokens to track…
I needed to mount my Zoom h4n pro to a microphone stand so i have designed a mounting bracket for it which holds the whole device in place not just by the screw. I have added a screw stl to it so you dont have to search for it. Enjoy…
Just a simple replacement bracket for the NZXT H440 case. I saw that someone was needing one over on Reddit/hardwareswap and I have an H440 readily available so I figured it would be great practice modeling plus it is always nice to add…
Wall Fan as seen in the Video Game Space Hulk Other items form this collection can be found here: Space Hulk Greebles - WH40k Collection by Vontragg | Printables.com Category: Buildings & Structures
The original thing is design by DaXLR . To simplify assembly, I combined base with middle part, and made cap a bit smaller. It's made thing more printable. Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Notes: After…
Statue Vents as seen in the Video Game Space Hulk Other items form this collection can be found here: Space Hulk Greebles - WH40k Collection by Vontragg | Printables.com Category: Buildings & Structures
DamienB2 provided a very nice stand for the Tiny SA Ultra, (See the Remix Link) but I could find no equivalent for the Nano-VNA, so I remixed his to fit the NanoVNA and have posted it here. The base and stylus are directly from DamienB2's…
Alternative top for the excellent 40k Rhino model by GlenSergy. Your choice to add different hatches with driver or to have the top doors open. Category: Vehicles
I wanted to try out different types of mechanical joints. My goal was to make it fit around my finger. Of course, you can also use H4L0 without a finger. Perhaps H4L0 will adorn the finger of a chosen one in the near future. Who could say…
More Than a Hobby — A Mission to Protect While 3D design is my passion, it's also part of a greater mission. I collaborate with U.S. government special teams to identify and monitor threats to children — including abduction networks and…
Accents for the excellent 40k Rhino model by GlenSergy Category: Vehicles
This is the ultimate HackRF H4M case with many improvements: Designed for 3d printing, with larger tolerances than the original case (which was made for injection molding with very tight tolerances) Powered by a replaceable 18650 Li-ion…
The NanoVNA-H4 neatly pops onto this stand, held in place by small lugs that fit into the screw holes on the back of the device. It leaves all the controls accessible and has enough clearance for a small USB C cable at the bottom. There…
Hyperios Radar assembly fits Tarantula base or Aegis base Compatible weapons platforms can be found here: Hyperion Defense System Collection by Vontragg | Printables.com Category: Props
This adapter will give you the possibility to mount any phone mount or GPS using the slot of a OEM vent. The AMPS hole pattern is used by some GPS such as Garmin or Tomtom. Also there are ton of Ram mount adapter. Specs For Spider and GTV…
I made a hook that holds my headphones that clips on the front face plate of the NZXT H440 Print instructions Category: Audio Summary I made a hook that holds my headphones that clips on the front face plate of the NZXT H440
This is a short stand for the HackRF H4M Portapack with the clock connectors removed. A right-angled USB cable will still fit if it's not too bulky. There are 4 versions: Stylus holder only MDK cutout only Stylus holder and MDK cutout…
I designed this case to attach the Flussmittelschorsch24 sensor board to my Landis Gyr+ E220 energy meter. I usually stick the magnets into my cases. But in this case I just fixed the magnets with adhesive tape. PCB: https://fms.lol…
Set of statue alcoves / niches with shelves. These can be inserted into Styrofoam or Cardboard walls to enhance your buildings. The recesses are 32mm X 78mm X 11mm (1.26" X 3.07" X 0.43") Length X Height X Width The shelves add another…
Vents and greebles as seen in the Video Game Space Hulk Other items form this collection can be found here: Space Hulk Greebles - WH40k Collection by Vontragg | Printables.com Category: Buildings & Structures
Imperial Angel - "He is our Shield" - Statue for WH40k Although you can place this statue on any base, I placed it on an old iPhone earbuds case. Other statues can be found here: OBL Statues - WH40k Collection by Vontragg | Printables.com…
Compatible ioplate for MSI H410M PRO-E
Nurgle accents for Arvus Lighter like flyer. Category: Vehicles
3 alternate rocket pods original fine work by Hszer0, Cosmocrator, and AlbinoRavenMini. Rescaled all the models to correct dimensions, added some skulls, rivets, sensors, and rockets, finally sliced them up for easier print. Compatible…
I wanted to add more drives to my NAS but keep using my old cast-off H440 case. Since the drives mounts are spread far enough apart in the original design it's actually possible to fit two 3.5" drives in 4 of the 5 original mounting…
The NanoVNA slides in from the end and snaps into place. Accommodates BNC connectors up to 23mm long. Includes a holder for the stylus. I printed it with 4 walls and 25% gyroid infill because I like overkill. Will probably work just fine…
The original GH4 eyecup is a two piece design using a hard plastic base that clips onto the viewfinder and a softer rubber cushion. The plastic clip wasn't very sturdy; I lost mine when it slipped off the camera and I didn't notice until…
Consoles as seen in the Video Game Space Hulk Other items form this collection can be found here: Space Hulk Greebles - WH40k Collection by Vontragg | Printables.com Category: Buildings & Structures
You need 4x of each file for a complete terrain set. Added little supports just for stability and windows on exterior walls to reduce a little the filament usage. The perimeter requires a large print table of at least 220 x 220 mm. Since…
A large Necron Ziggurat as seen in White Dwarf Magazine. The roof top was inspired by the Space Wolf video game. Can be combined with Medium Necron Pyramid to form an even bigger structure. The sides have been provided as a single STL,…
Shortened version of the "H4" crossing from the excellent set of Brio-compatible tracks from Michal Fanta.
This is a cheese grate camera cage for the Panasonic GH4. https://www.thingiverse.com/thing:1691475 was the inspiration for this cage, but this was measured and modeled from my camera from scratch. This cage has a proper hotshoe catch to…
Tisk 2 částí. V modelu jsou připraveny oblasti pro větrací mřížku. Stačí nastavit 0 perimetrů a nechat vyslicovat jen výplň. Použil jsem výplň gyroid. Použity šroubky do plastu 2,2x8 mm.
![[MMCX] Improved Koss Porta Pro/KPH40 MMCX mod](https://media.printables.com/media/prints/39d849c5-c318-490f-85c4-746f794ea718/images/12685876_b204174d-b6f5-435b-80ff-69aea0402cb8_639d0a53-b401-4903-b3e8-e14b88bb5a76/pxl_20260416_050140763.jpg)
