1 / 3
H4 style headlight plug adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to use 7.6 (7.8?) mm spade connectors to connect to H4 style headlights.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 203
- Makes
- 0
- Views
- 884
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I used these to connect to 4x6" LED lights to the custom harness I make for customers. Bend the locking tab on the 7.6mm connector to lock into the adapter.
Parts required:
7.6 mm female spade connector (some list as a 7.8)
wire and terminating ends as required for the other side
Printed 0.2mm, 15% gyroid infill but this won't really matter, 3 perimeters, PLA as the wiring shouldn't get too hot with LEDs. If it will be more exposed consider a material not as susceptible to moisture and heat.