1 / 1
Abarth / Fiat 500 Biposto style vents for PH3 & PH4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Abarth Biposto style vents for both PH3 and PH4 oem vents.
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 568
- Makes
- 6
- Views
- 3,836
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Compatibility
Ph3 horizontal or Ph4 vertical oem fiat 500/595 vents.
Print
Print one with vertical symetry to get the 2nd side.
Use ASA or ABS for hot days…
For phase 4 only, you will need to apply a scale multiplayer because the oem vents are slighly bigger. You need to add 12mm to the whole part.
Assembly
To use it : You need to pull the oem vents from your car and disassemble the chrome cover with a knife or a flat screwdiver. Remove the top part of the cover before the bottom.
Then remove all the vents flaps and install the printed part.