316 models
My custom designed lid raiser for the Creality K1 Max. I wanted a simple version which required no additional components but allowed me to open and close the vents on the fly. Lid raisers for the K1 Max help improve the clearance between…
Lid raisers for the K1 Max help improve the clearance between the drag chain / filament tube and the glass top as Creality have designed it very very tight. The vents allow you to help prevent the temperature becoming too high inside the…
Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…
Update due to a review posted - Please be aware you are adding 50ish mm to the top of the printer with this vented riser, the existing spool holder will not work with this model and it wasn't designed to be used with the stock spool…
This is a remix of Craft3D's design. I liked the curved design but didn't have vents so I placed vents on it.
Highly detailed model of hood vents for the TRX-4M Land Rover intended for resin printing. Use CA glue to install.
I have seen these things all over on the web, but I decided to take a stab at my own. This one is very similar to most of the others, with the exception of the guard wall. I wanted to prevent getting the McSauce on or into my car vents.…
Fastener for lid raiser made by Tony F for the Creality K1 Max printer.
Update 27 July 2025 - I have added a add on that goes on top of my hood design to hold the CFS unit if your do or going to do the upgrade - Here's a Link for it -…
This was modeled off of a 1995 Suzuki Sidekick and should fit any vehicle with a similar dashboard center bezel. Some of the parts fit tightly and will need slight post processing. This was done to ensure everybody could print this even…
Please consider leaving a like. or just take it and slink quietly out the side door. NOTE:- If you intend to keep the rubber strip that is already affixed to the printer frame (where the glass rests normally), then fitting the shallow…
I needed a riser for the top glass of my P1S printer. I wanted one not too high, with vents and LED light. There's a plenty of such projects on Printables, but I couldn't find one meeting my expectations. So I decided to design another…
Printing I printed all components on the K1C itself. Panels and corners are designed to be printed stood up - you will need to orient the panels diagonally on the build plate to get them to print - they should not be scaled. With your…
A fully parametric travel soap case , which you can adjust to suit your own needs. It includes a drying tray , air vents and safe closure . Print as it is, without support. Available in the following sizes ( inner dimensions ): Very large…
More Remix Notes: This is of course based off of the very cool: SE3D Elegoo Centauri Carbon Toolhead Cover UPDATE: Please consider downloading this other, latest remix, it is what I was going for initially and the fan mounting is SO MUCH…
UPDATE! the design of version 1 was a bit too brutal, also the air vent bracket clip was not very stable in case of a sudden turn… the new V2 solves both issues. After several iterations I now added a version 2 which looks much better,…
This is a refined tilt open support, with a strengthed and angled glass lip and designed to fit K1 Max Glass Lid Raiser
Compatibility Ph3 horizontal or Ph4 vertical oem fiat 500/595 vents. Print Print one with vertical symetry to get the 2nd side. Use ASA or ABS for hot days… For phase 4 only, you will need to apply a scale multiplayer because the oem…
Recommended Tree Support, No Need for Raft.
For a pre sliced version visit makerworld version. Copy the following onto the end of regular link to find it - models/17445#profileId-16292 Glass Top Riser with adjustable vents to suit Bambulab X1 and P1 Series Printers. The Frame is…
Simple Countdown Advent Calendar - No MultiMaterial Printer needed, just switch the filament at 25mm height for the numbers.
This is just a remix of the original model by @JesusFreak_374811 , I have only removed the ventilation holes but left the nice angled grid in the front because I think it looks nice. Print all the corner pieces from the original model…
TL;DR A tool free, snap fit joints only, moravian star. update 2023-1214 step by step build sort all parts, use glue at least for outdoor stars if trained with hot glue, that will speed up the assembly a lot, if not use super glue first…
(apologies - this sat unpublished since 2020) This set of things is for filling holes left by removing 5.25" drives (eg: DVD drives) from computers, or replacing broken ones. I'm providing these (for a start, I may add more in the…
this is a remix of the Dummy 13 GU10 lamp head. I made some simple vents in the top en bottom of the head
6 month update: my motor blew up before these had any issue so I'd say they're good. They survived 110*F southern heat + 195*F thermostat valve. Who know you could make good hood vents out of plastic!? Plus on a dewy morning, you can see…
Custom ventilation vents for steel dash converted VW Beetles. I'm not sure if it directs the air in the best way, let me know if you test them and have suggestions! I used a resin printer and Siraya Tech Bue resin but have tested filament…
Original File fits 38mm/1.5" holes. Made four more sizes: 22mm/7.8", 25mm/1", 32mm/1.25", 51mm/2". Per original file instructions: I recommend either printing separately or using different print settings for each model On the bolt 30 to…
Found out that XL Buddy board, gets a bit hot while the XL is operating. Around 85-90 °C , at least that's what the screen told me. I figured, why isn't this pretty beefy board compartment ventilated at all? Made a new cover, retains the…
This functional 3D-printed laptop stand is designed for the MacBook Pro 16-inch model. It features a separate piece that holds the cables in place, which is then inserted into the main body to lock them securely. This prevents the cables…
Feb 17 2025 update :- An error with the button assembly was brought to my attention today. There was no hole where there should have been one on one of the button tops. I've done a quick fix and re uploaded with the new button replacing…
Not my file. Reuploaded for my collection Thingiverse thing:5752440 by Superknutselsmurf
I modified the popular BTT Pi case to suit my needs.
Smarter Airflow. Better Prints. Zero Effort. Take complete control of your enclosure’s airflow and temperature—automatically. The CoreVent opens and closes in response to internal fan pressure, keeping heat stable for demanding materials…
Kostka3D's case is perfect: https://www.prusaprinters.org/prints/77387-raspberry-pi-3a-case I just added some venting for passive cooling.
Drucke zuerst die Datei Advent_Test (1).gcode um zu sehen, ob die Kerze passt. Einstellungen: 0.4 Nozzle 10% Füllung (Gyroid) Keine Stützen notwendig
These are replacement dash vents I made for the T1N Dodge or Mercedes Sprinter. These are left and right sides that fit both drivers and passenger sides. They are labeled L1-L6, R1-R6. There are also a set with a hole on one side to use a…
LED-Teelicht Adventsständer Ein stimmungsvoller LED-Adventskerzenständer für die Vorweihnachtszeit! Dieses Projekt besteht aus einem Halter und vier dekorativen Steckelementen (1–4) in Haus- und Tannenbaumform. Ideal für LED-Teelichter –…
This is a remix of a x1 fan with the following improvements: -> Split duct for each side so it has an even distribution of air. -> Space for the level sensor -> And it is gripped by a screw so there is no need for glue or risk of falling…
Needed hardware: 4 - 50mm m3 Round Hex Head Screws You will have to change the path of the print head cable to accommodate the rear vent. See the photos for what I did for this change. Print in ABS or ASA since the top gets the most heat.…
Resized (reduced) to fit on my 220x220 mm print bed. I remixed the case and added a “liner,” so the case can be printed with a darker color of filament while the liner can be printed in a reflective white filament. I also remixed the case…
Need some ventilation for the air flow through your RC plane? This is designed to work with foam board planes that need an air outlet to let the battery and internal electronics cool down. Printed in: Matt White PLA by Overture…
Remix of the original v2 D3vil Burner Cover with hex cutouts instead of the fractal cutouts on the sides.
Designed these and have been running them on my track car for a few months now, glued on. Haven't had any issues other than getting called a ricer. Printed in PETG and spray painted with white enamel for extra protection
I made this file to make Rally vents for my 2013 Ford Focus ST for track days. When I printed the files I cut it in to thirds and acetone welded them.
Description This is a Hex pattern vent designed to replace the top part of the OEM vent. Since it does not provide any way to close or open the vents, it's not something that I personaly use and it was more a props to test another…
Three styles of substitute faceplates for the Jonsbo N1 PC case, with vents and 3.5mm mesh clearance, for greater airflow and lower thermals. Simply attach it by using your original faceplate screws and 3D printed washers (no rubber…
I'm doing the metal dash conversion on my 74 Standard Beetle. I don't want to weld the passenger facing vents shut so I opted to make some plastic vents instead. These just glue into place on the dash. I used a dab of super glue but I'm…
This functional 3D-printed laptop stand is designed for the MacBook Pro 16-inch model. It features a separate piece that holds the cables in place, which is then inserted into the main body to lock them securely. This prevents the cables…
These scans can replace the stock interior door card defrost vents on either door, that are subject to cracking and breaking over the years. This part is impossible to find nowadays. Thanks to Seven!!…
I wanted a magnetic (magsafe) car phone holder, which holds great in my car. It works with iPhone 12 or 13 (including pro and pro max). You'll need: 28 pcs of 5x5mm neodymium magnets one M6 bolt (16mm) with regular nut or a 20mm + a…
Fits raspberry pi 4+5, possibly others, but not tested. I used M2.5x8mm screws from the local hardware store but M2.6 would be a tighter fit. 2 Versions for 3mm and 4mm. Typical 10 inch size is 4mm.
Customize to suit your needs , paramaters avilable for single point changes with no modeling skills. I will update f3d for the K1 Max and K2 Plus in the notes for values if i get a chance.
A ‘quick and dirty’ remix to add some vents for the UCG-Fiber unit after reading some reports that the unit may get quite hot otherwise. After printing mine, I'd repositioned the vents slightly toward the rear to better align everything.…
Only a slightly modified model from XVIIarcano. Bracket shortening and cradle extension for Redmi Note 9 pro.
Adapter plate to mount your phone holder between vents in Audi A3 8V. Modular design provides easy way to change diameter of ball head according to your needs. Just design ball in required size. Holes for screw are designed for general…
Weihnachts-Adventskranz mit Rentieren – Ø 250 mm | 3D-Druck Christmas Reindeer Advent Wreath – 250 mm 🎄 Ein zauberhafter Adventskranz für die Weihnachtszeit! 🦌 Dieser liebevoll gestaltete Adventskranz verbindet traditionelle…
Hello, I designed this Top Glass Riser because I recently upgraded my P1P and was quite shocked that the glass simply rests on top of the printer, I looked online for risers, and while there are many designs, none fit all the criteria I…
you may have to scale down to 10% size.
Need (2x) Rubber Bands. ASA recommended for UV resistance. One Size Fits All!
This is a configurable riser/top-hat for the SOVOL SV08 printer. In its basic form, it has four corner pieces (labeled) and four vented panels. The panels include an optional slider to open and close the vents. The optional/replacement…
This is an enclosure for a cheap hygrometer from Wish.com (https://www.wish.com/product/5f60859d070db5177c70a396). The model has a clip that clips onto car air vents (or anything else you may like). Place the screw on the inside of the…
This is a vented spout to make pouring of liquid more fluidly. Made to help pour screenwash into the screenwash continer on the angry panda. Insert the spout into the opening of a container and pour into the reservoir. The air should vent…
I was inspired by the Fan cover from @Kevin_45728 at https://www.printables.com/model/584437-prusa-xl-buddy-cover-with-vents-and-fan-mount . But i redesigned it. Also i made it compatible with the 5 Tool XL. Also i wanted the Warm Air to…
This adds 2 news sizes. The original opening is 16 cm. This adds supports with 6 cm and 3 cm openings.
Funnel with ventilation ribs on the sides. The spout at the bottom is cut for better draining of remaining liquid.
à imprimer comme l'indique Kevin n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
Just more free parts to use on model builds.
***** New and improved Version 2 (LED track, new connectors, hinge for glass) can be found here . ***** I wanted a base / riser for the top glass that has some vents in it and is strong enough to hold the AMS system when seated on top and…
Clean, easy to print top glass riser tested on both P1P and P1S. Added vented slots and a mount in the left inside corner that I use for a camera, can be about anything I expet. Amazon.com : YI Home Security Camera, 1080p 2.4G WiFi IP…
Simple to print vents that can be used when using: https://www.printables.com/model/325471-flsun-v400-upper-plate-risers Easiest to print with mesh down. --------------------------------------- More effective active cooling vents can be…
Info: The holes for the candles are 22mm and 250mm print hight is needed. Print Settings: 0.2mm or finer Layer hight (especially for the no. 3) PLA 3 walls/perimters 15% Gyroid Support Auto-Tree (but the outside of no. 4 looks not so nice…
Key Replacament for Controll Buton Smoke Extraction Vents Model RT 45-LT D+H Mechatronic AG Better and stronger than geniune _ Use some supports to keep print stable white printing Category: Replacement Parts
Motorbetrieben mit 22 Kalendergondeln. Ich habe das Model auf den Prusa XL abgestimmt. Ggf. weitere Verbinder hinzufügen. Benötigt werden: Kugellager 6004 — 20/42/12 von TechTom…
there are 2 styles of vent, the original shape by Simon Jin, just made a bit easier to print. and my addition of a inner ring that rotates slightly easier. be aware once its pressed in, it is pretty permanent. the inner ring also has…
This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as such many enthusiasts have changed out to using the later model vents. Making these impossible to find. But with the…
Main Print Page Color sequence: Primary Color Purple (Epic Items) Green (Events) Red (Items) Silver (Mine Events)
We're having trouble with family members tipping over on our IKEA Poang chairs. We've tried several things, including gentle reminders not to sit on the very edge of them, but nothing has worked. The Poang chairs do come with a little leg…
1/12/2025 - This design will no longer be updated here on Printables. Since it is a Bambu Specific design, I plan to keep the version over on MakerWorld updated. You can find the latest version of this design here:…
This organizer will hold your Dungeon Universalis (DUN) Travel Events, Services and Danger cards. In case you sleeve your cards, I got your back: Card compartments are dimensioned to hold cards sleeved with 63,5x88 mm sleeves. To save…
This is the updated version of the 90 to 120 mm fans duct adaptor. A number of people asked if I could make a version of the duct with side vent to cool the voltage regulators. on the Bitaxe NerdOCTaxe bitcoin miner. The miner can be…
My triplets needed to be exhausted out one window opening, so I modded these vents in order to daisy-chain them. These work with U.S. standard 4" dryer vent hose. There are two versions of each, one with hinges and one without (except for…
Ich habe mir diese Halter für die Schraubendreher von Wera Konstruiert. Das Set besteht aus dem Adventskalender 2021. Die Bezeichnungen habe ich mit Buntlack angemalt. Alternativ kann man natürlich auch mit Filamentwechsel farbig drucken.…
Remix of Retro Frog's QMtech MiSTer FPGA Compact Case that has ventilation added to sides and bottom for more airflow. Use buttons from Retro Frog's original model. .2 layer height PLA +
I was looking for a low profile lid raiser and RobertCowanDIY design the Creality K1 Max Lid Riser - No logo, slimmer vents got my attention. I just wanted extra security for the glass thus I remixed it by adding an additional 2.5mm to…
This is the blank for my other upload. You can set the holes to wahtever you want. I made this file to make Rally vents for my 2013 Ford Focus ST for track days. When I printed the files I cut it in to thirds and acetone welded them.
Remix of Surfalex2000's Buddy box Cover to support a 50mm fan. Fan guard included. If you can't get the air vents to stay in place, use a soldering iron to fuse it in place. Worked out really well. My fan is powered by a 5v adapter i had…
This is a remix of the vent portion of the R2D2 Tissue Box by Philippe Lacoude. I made the vents screen accurate, easier to print, print as one piece per vent instead of 3, and fit into the pre-existing cut-outs in the blue portion of the…
Started with the best Centauri Carbon 1 Canvas low profile mount from @ALExtremeErr_2722476 Many thanks to the original creator for such a great design that met my needs. The modifications I made were mostly to meet my specific LED strips…
Please note that the tray doesn't fit in the box insert. I recommend a .2mm layer height. This is a part of my insert for John Company 2 : https://www.printables.com/model/718520-john-company-2-insert-organizer
Show off your love for Tupperware with this adorable keychain replica of the iconic Ventsmart 800ml container! This scaled-down model is designed to keep your keys secure and add a touch of Tupperware flair wherever you go. Perfect for:…
Numbers 1 to 4 with a hole on top for binding to a candle holder or Advent wreath I printed it with Woodfill filament. Have fun and happy Christmas time! Print instructions Category: Decor Print Settings Printer Brand: Prusa Printer: i3…
To mount an ESP32 Camera to the inside of the Prusa EnXLosure . This is a remix of Voxel3D's great original design, which didn't work for me as my ESP32-CAM module uses a USB-C cable and none of my cables fit through the cutout of the…
Ein Stern pro Tag in der Adbentszeit: Sterne mit Tageszahlen für den Adventskalender. Für den Bambulab vorformatiert 2 farbig …
This model is for IKEA Rudsta Tall glass cabinets that have been turned into plant cabinets. The vent holes allow for humidifier mist to travel to all levels of the cabinet. You must print 4 of these in order to create 1 shelf. The model…
Simple audi TT Vents Phone Holder u can glue magnet or even magnetic phone holder to it. Print minimum 4 peremiters and 60% infill
The most recent set of boxes I received (4 of them) all have a bit narrower slot to place the “toe” into. I have remixed V3 into this V4 using the values supplied by Macco in his review of V3. I did a test print and they do slide in the…
Die Idee zu diesem Adventskalender war ein Häuschen aus Streichholzschachteln das als Adventskalender genutzt wurde. Dieses hat meine Frau, die Paula, von ihren Eltern vor vielen Jahren bekommen und lange genutzt. Der ganze Kalender…
No support needed. The model is pretty big at the moment, so scale down if you want a small keyring.
![K1 Max tilt open lid support redesigned to fit K1 Max Glass Lid Raiser (with Sliding Vents) [ADDED: sizes]](https://media.printables.com/media/prints/1002651/images/7629517_62fb3ee1-aec1-44bd-98f7-2312b4310ede_ba387ca4-9b99-43b6-bae3-25b68141b96b/20240910_101301.jpg)
