Lower dash vents for Land Rover Series III
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as…
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 113
- Makes
- 0
- Views
- 524
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as such many enthusiasts have changed out to using the later model vents. Making these impossible to find.
But with the magic of 3D Printing you can just print your own.
Print instructions
Unassociated tags: Series ii, Series III
Category: Automotive Summary
This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as such many enthusiasts have changed out to using the later model vents. Making these impossible to find.
But with the magic of 3D Printing you can just print your own.
Print Settings
Printer: OrdBot Hadron
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Notes:
Print in ABS or ASA as PLA wont survive inside a vehicle.
Designed to be printed face down without supports.
How I Designed This
Designed in Fusion360 of a template photo and some measurements.
Special thanks go out to the "3D Printing Australia" group for kicking my brains 3d dimension back into gear