1 / 5
Lower dash vents for Land Rover Series III — zdjęcie 1
1 / 5

Lower dash vents for Land Rover Series III

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as…

Ocena
0 / 5
Polubienia
15
Pobrania
113
Wydruki
0
Wyświetlenia
524
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as such many enthusiasts have changed out to using the later model vents. Making these impossible to find.

But with the magic of 3D Printing you can just print your own.

Print instructions

Unassociated tags: Series ii, Series III

Category: Automotive Summary

This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as such many enthusiasts have changed out to using the later model vents. Making these impossible to find.

But with the magic of 3D Printing you can just print your own.

Print Settings

Printer: OrdBot Hadron

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20%

Notes:

Print in ABS or ASA as PLA wont survive inside a vehicle.

Designed to be printed face down without supports.

How I Designed This

Designed in Fusion360 of a template photo and some measurements.

Special thanks go out to the "3D Printing Australia" group for kicking my brains 3d dimension back into gear

Tagi