Prusa XL series: Buddy cover with air vents and 40mm Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another Buddy electronics cover with fan, to keep them chips cool!
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 137
- Makes
- 11
- Views
- 1,586
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
I was inspired by the Fan cover from @Kevin_45728 at https://www.printables.com/model/584437-prusa-xl-buddy-cover-with-vents-and-fan-mount
. But i redesigned it. Also i made it compatible with the 5 Tool XL. Also i wanted the Warm Air to vent out to the left.
You will need a 40mm Fan that you can connect to the internal PSU and Power Rail. I think it will be possible to connect the fan via the USB-C provided in the back. Connect the Fan with this Usb-C Plug: https://amzn.eu/d/7KughCU
It is a 2 part piece, that should snap together or that you can glue. Split them for easier printing. The Fan im using is a Noctua 40x40x20mm Fan, that you can find here:
https://www.amazon.de/gp/product/B071W6JZV8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
You will need 4x 25x4mm screws. No needs for nuts.
Have fun
After many asked me how they could support me, you can now
Tip me on KO-FI by klicking here:
https://ko-fi.com/surfalex2000
Check out my other optimized XL Parts! There is a Series to come!
You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114