1 / 4
Prusa XL series: Buddy cover with air vents and 40mm Fan — zdjęcie 1
1 / 4

Prusa XL series: Buddy cover with air vents and 40mm Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Another Buddy electronics cover with fan, to keep them chips cool!

Ocena
5 / 5
Polubienia
39
Pobrania
137
Wydruki
11
Wyświetlenia
1586
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

I was inspired by the Fan cover from @Kevin_45728 at https://www.printables.com/model/584437-prusa-xl-buddy-cover-with-vents-and-fan-mount

. But i redesigned it. Also i made it compatible with the 5 Tool XL. Also i wanted the Warm Air to vent out to the left.

You will need a 40mm Fan that you can connect to the internal PSU and Power Rail. I think it will be possible to connect the fan via the USB-C provided in the back. Connect the Fan with this Usb-C Plug:  https://amzn.eu/d/7KughCU 
It is a 2 part piece, that should snap together or that you can glue. Split them for easier printing. The Fan im using is a Noctua 40x40x20mm Fan, that you can find here:

https://www.amazon.de/gp/product/B071W6JZV8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

You will need 4x 25x4mm screws. No needs for nuts.

 

Have fun

 

After many asked me how they could support me, you can now 

Tip me on KO-FI by klicking here:

                                                      https://ko-fi.com/surfalex2000

 

Check out my other optimized XL Parts! There is a Series to come!

You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114 

Tagi