P
PrintablesDK
abarth diffuser logoabarth diffuser logo
printed in petg
- Downloads
- 629
- Likes
- 54
- Rating
- 5
Search results: abarth
70 models
P
PrintablesD.K. 3D
Fiat 500 / Abarth Becherhalter (Cup holder)
Ich habe für mein Abarth 595 eine Verlängerrung Erstellt, damit Flaschen/Dosen besser halten. Die Verlängerung passt perf Passt für die Fiat 500/Abarth ab bj. 2009-2017 (bis Gen.3) Erstellt habe ich es mit Solid Edge 2024 und stelle hier…
- Downloads
- 627
- Likes
- 45
- Rating
- 5
P
Printables4sStylZ
Abarth / Fiat 500 Biposto style vents for PH3 & PH4
Compatibility Ph3 horizontal or Ph4 vertical oem fiat 500/595 vents. Print Print one with vertical symetry to get the 2nd side. Use ASA or ABS for hot days… For phase 4 only, you will need to apply a scale multiplayer because the oem…
- Downloads
- 562
- Likes
- 55
- Rating
- 5
P
PrintablesStef
ABARTH letters grille
These letters can be printed in a multitude of colors from the iconic green-white-red to a more simplistic all white. Switching colors during printing is required to obtain color difference. Letter mounts are placed on the back of the…
- Downloads
- 543
- Likes
- 35
- Rating
- 0
P
PrintablesLaura1207
Print-in-Place Flexi Abarth Scorpion (with hole for magnet!)
The version with the hole for the magnets can hold four 5x1 round magnet stacked on each other, but i included the .f3d file if you want to modify it to fit other sizes. Be careful if you want to size it down because i don't think the…
- Downloads
- 467
- Likes
- 69
- Rating
- 5
P
PrintablesAtticus
Fiat punto evo Abarth emblem
The emblem from my car fell, so I printed another one. You can swap filament at the required layer.
- Downloads
- 317
- Likes
- 34
- Rating
- 5
P
PrintablesCarDesignLab
Fiat 500 Abarth (2013)
If you want to get this template without subscribing, write me in chat! - SideSilhouette
- Downloads
- 298
- Likes
- 39
- Rating
- 5
P
PrintablesNULL
Abarth Logo Plaque
Re-uploaded with a simpler filename for anyone looking for an Abarth logo to print.
- Downloads
- 270
- Likes
- 10
- Rating
- 0
P
PrintablesBasementLAB
Abarth - Keychain - Portachiavi - Porte Clès - 钥匙链
Abarth - Keychain - Portachiavi - Porte Clès - 钥匙链 From Wikipedia, the free encyclopedia: Abarth & C. S.p.A. (Italian: [ˈaːbart] ) is an Italian racing- and road-car maker and performance division founded by Italo-Austrian Carlo Abarth in…
- Downloads
- 239
- Likes
- 17
- Rating
- 3
P
PrintablesAndrii Romanenko
abarth seat release handle 3d scans
My friend gave me a broken abarth back seat release handle. I have 3d scanned it but do not have skill to design it. maybe somebody will have. there are revoscan project files in zip archives.
- Downloads
- 238
- Likes
- 9
- Rating
- 0
P
PrintablesNessuno0505
Fiat/Abarth 124 Spider / Mazda Mx-5 Magnetic Smartphone Holder for Cupholder Plug
This is a magnetic smartphone holder designed remixing this thingiverse simple base plug for the Fiat 124 spider / Mazda Mx-5 cupholder slot https://www.thingiverse.com/thing:2108802 . It is intended to be printed in a heat-resistant…
- Downloads
- 236
- Likes
- 20
- Rating
- 0
P
PrintablesSamuel Panák
Abarth car wheel cover
This model is remix of two models from thingiverse, abarth wheel cover 43mm and abarth scorpione. I remix it to made it more detailed and filled logo of scorpion on the top of car wheel cover. First version ( abarth_cover_lower ) has…
- Downloads
- 195
- Likes
- 17
- Rating
- 0
P
Printables4sStylZ
Abarth 595 / 695 ph3 fog light cover
Some cover to hide the chrome. Pair them with plastic dip paint to get a nice black matt finish.
- Downloads
- 191
- Likes
- 8
- Rating
- 0
P
Printables4sStylZ
Abarth PH3 fog light delete grid
Need to be printed with vertical symmetry to get the 2nd side. Better use ASA or ABS.
- Downloads
- 182
- Likes
- 24
- Rating
- 0
P
PrintablesPLAUK
Repair Insert for Abarth 595 or Fiat 500 130mm Wheel Centre Caps
It is common for the tabs on the back of the 130mm centre cabs to break during removal. This glue-in insert can repair a broken tab and extend the life of the cap. Ideally print in ABS and use a solvent cement to glue the required amount…
- Downloads
- 176
- Likes
- 19
- Rating
- 5
P
Printables3d printing guru
Abarth Club logo
simple but yet effect Abarth logo
- Downloads
- 169
- Likes
- 3
- Rating
- 0
P
Printables4sStylZ
Abarth non-standard boost gauge / manometer cover v2
A new version of my previous boost gauge. This one is more deep and provide a little cap to avoid sun reflection.
- Downloads
- 167
- Likes
- 14
- Rating
- 0
P
PrintablesFv Racing
Fiat New 500 Abarth wall art
Per gli amanti dello scorpione italiano e della 500 Abarth,personalizza e stampa la tua 500 da mettere in una parete, Sostieni i miei piccoli progetti
- Downloads
- 148
- Likes
- 22
- Rating
- 0
P
PrintablesMr. Smith
FIAT 595 Abarth
Die Original Version war mir doch etwas zu langweilig. Daher hab ich mir meine eigene Kreation erstellt. Wieder mit eigenen Felgen und getrennten Reifen. Die Reifen müssen in TPU gedruckt werden. Da Sie sonst nicht über die Felgen passen.…
- Downloads
- 145
- Likes
- 9
- Rating
- 0
P
PrintablesSamster125
Fiat Abarth Shift knob cover with logo
Found the Abarth shift knob cover from Weverett1997. Had some time so I added the scorpion logo. Print the cover as is and fill the scorpion emboss with paint or print the scorpion logo separately in a different color and glue in place.…
- Downloads
- 144
- Likes
- 11
- Rating
- 0
P
PrintablesLilyPink
Fiat Abarth 500 Alloy Wheel - Replica Model.
Model made in Fusion 360 by myself… copied from an image found online of the wheel, then just made my own similar version of it,,, it isn't exact, but a nice representation of that type of wheel design from a special edition Fiat 500…
- Downloads
- 142
- Likes
- 10
- Rating
- 0
P
Printables3dpieces
abarth key holder
Beautiful and very easy to print. A unique Abarth key ring
- Downloads
- 122
- Likes
- 6
- Rating
- 0
P
PrintablesFilip Poludniak
Abarth DRL Delete
This is a printable Abarth 500 DRL delete. Use 100% infill and print out of PETG, ASA, ABS I used a mix of hot glue, super glue and black high temp silicone to secure the insert. I did shave away some plastic on the inside so it will sit…
- Downloads
- 115
- Likes
- 10
- Rating
- 0
P
PrintablesPrintitou3D
LOGO ABARTH - MMU VERSION 5 couleurs
Je l'ai imprimé face contre le PEI texturé afin d'avoir ce rendu sur le logo. Le modèle peut être réduit jusqu'à 70% de sa taille originale en activant la détection des parois fines (modèle test que j'ai imprimé). J'ai mis a disposition…
- Downloads
- 111
- Likes
- 20
- Rating
- 0
P
PrintablesHzon 3D
Abarth 500 Tailgate handle
My Fiat 500 tailgate handle remade in ABARTH version. The scorpion is press fitt to the handle, no glue needed. I used a hammer to gently knock the scorpion into position. Print w-out support, at least 5 wall loops and 30 infill.
- Downloads
- 107
- Likes
- 15
- Rating
- 0
P
Printableskubajabko
Abarth 500/595 Rear tow hook cover (pre-lift)
You might want to use 99% scaling depending on material and shrinkage settings that you choose. Mine is printed with ASA and 99% scale.
- Downloads
- 104
- Likes
- 12
- Rating
- 0
P
PrintablesStefano.3D
Abarth Keychain 125KHz RFID Tag
Abarth Keychain 125KHz RFID Tag MMU2 https://vespa-riviera.ch/ Abarth Keychain RFID Printed Prusa MK3S MMU2 0.30 mm https://www.wish.com/product/594b8c29d791a240b572fed5 125KHz RFID Tag 5pcs, 2.- Swiss Francs (CHF) Print instructions…
- Downloads
- 94
- Likes
- 13
- Rating
- 0
P
PrintablesFilip Poludniak
Abarth Grill Highlights
This is an Abarth 500 Grill clips that adds some personalisation to your Abarth. Fits pre facelift Abarth 500. I recommend using PETG or ABS
- Downloads
- 86
- Likes
- 8
- Rating
- 0
P
PrintablesImmaginaecrea
4 Colors Abarth Logo
Printed with 4 way Flux capacitor Category: Signs & Logos
- Downloads
- 76
- Likes
- 12
- Rating
- 0
P
Printables4sStylZ
Abarth non-standard boost gauge / manometer cover
Diameters dimensions are 41,40 to 42,50mm on the bottom, and 30 mm on the top. The second file is carved to be filled with epoxy resin.
- Downloads
- 73
- Likes
- 3
- Rating
- 0
P
Printables4sStylZ
Abarth 595/695 Door handle strap prototype
This is a prototype of a door handle with strap to get a « GT3 rs » door handle look on a Abarth. This is a work in progress file that will break at the first use. The only thing is that I designed the door handle a bit too thin : The…
- Downloads
- 68
- Likes
- 13
- Rating
- 0
P
Printables4sStylZ
Abarth CAE Shifter Plexiglass cover
This is a cover designed to be used with a plexiglass part well cut. There are multiple parts : The cover need to be printed with ASA. I suggest to print it reversed on a textured plate to get a look close from oem plastics of the 500.…
- Downloads
- 63
- Likes
- 5
- Rating
- 0
P
PrintablesImmaginaecrea
Gear Knob for Fiat-Abarth 124 Spider - Mazda MX-5 ND
This gear knob is mountable on all cars that have the gearstick knob coupling with an M10X1.25 mm thread and the 6-speed configuration with reverse gear forward on the left. Printed with 0.06 mm layer height and polished with 1000 grit…
- Downloads
- 60
- Likes
- 16
- Rating
- 0
P
PrintablesSamster125
Fiat 500 Abarth cowl grill repair
Some of the small grill below the wipers broke off leaving a large gap for leaves and debris to go under the cowl. I designed a short section with Abarth logo to fill the gap. Printed in PETG without supports. You could modify the file in…
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
PrintablesKevin Wells
US Fiat 500 - Abarth Grill Letters
I was jealous of the Euro Fiat 595's and their ABARTH grill letters, so I decided to model my own for my US spec Fiat 500 Abarth. These letters get printed in two separate parts; Backers & Letters. The backers are the pieces that actually…
- Downloads
- 53
- Likes
- 4
- Rating
- 0
P
PrintablesStan Zdonick
remixed abarth logo 25mm resize
Original model was huge, this size is usable,
- Downloads
- 51
- Likes
- 3
- Rating
- 0
P
PrintablesRocker3D
Air vent repair kit for Fiat 500 & Abarth 500/595.
Air vent repair kit for Fiat 500 and Abarth 500/595. When replacing the factory radio with an aftermarket unit, the air vent grille has to be removed. Unfortunately, after this modification the ventilation no longer works efficiently. My…
- Downloads
- 42
- Likes
- 5
- Rating
- 0
P
PrintablesWilliamPondside
Scorpion (Abarth) wheel center cap
Wheel center cap scaled and scorpion added. -Outside 59,35mm -Inside to the wheel 55,6mm -Height 13,56mm -Made of PETG, 20% gyroid infill I made my for two different colours
- Downloads
- 39
- Likes
- 2
- Rating
- 0
P
PrintablesRocker3D
Abarth center cap for alloy wheels
Wheel center cap with a beautiful Abarth logo on it. Please print it using only ABS or ASA, and before printing, please check if it will fit your wheels. If not, just scale it.
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
Printables4sStylZ
Abarth / Fiat 500 Biposto style vents for PH4 TEST PART
This is a draft for test fitment.
- Downloads
- 34
- Likes
- 5
- Rating
- 0
P
PrintablesWilliamPondside
Fiat / Abarth style front mud flaps (Linea / Grande Punto)
Whaaaaat? Fiat / Abarth style front mudguards for Fiat Linea / Grande Punto. 3MF files include logos, STL files do not. Material PETG / ABS / TPU Infill 50-100% Wall loops 5 Bottom / top layer thickness minimum 1 mm, always better, the…
- Downloads
- 33
- Likes
- 8
- Rating
- 0
P
PrintablesAndreaCav
logo abarth
logo-stand abarth for 5-color reverse printing layer 0.2 pla
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
Printablesmeshvault3d
Abarth 124 Spider
Abarth 124 Spider is a digital STL model prepared for 3D printing. Preview renders show the supplied geometry from multiple angles. Choose scale, orientation, supports, layer height and material for your printer. Digital file only; no…
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
Printables4sStylZ
Abarth 595/695 Rallycross rainlight bracket
Notice : I am not a dog and I share my best 3d designed free to print. Please if you want to sell them, contact me and I am sure that I can provide you a very fair price for a commercial license. Theses rally / rallycross inspired lights…
- Downloads
- 29
- Likes
- 12
- Rating
- 0
P
Printablesss98
Portachiavi Abarth
Portachiavi Abarth con tricolore su fondo nero. Le lettere sono stampabili a parte per poterle colorarle.
- Downloads
- 29
- Likes
- 0
- Rating
- 0
P
PrintablesKonrad Tomczuk
Abarth logo cookie cutter
Made by myself. No supports etc.
- Downloads
- 28
- Likes
- 2
- Rating
- 0
P
PrintablesRocker3D
Abarth 500/595 rear wiper plug
The best mod for your Abarth 500/595 etc. Change the look of your car’s rear with this simple trick. Tutorials on how to remove the rear wiper are available on YouTube. Highly recomended to print it with ABS. Use dedicated glass adhesive…
- Downloads
- 27
- Likes
- 5
- Rating
- 0
P
PrintablesPro Plem
Fiat 500 / Abarth 500 - 165mm (6.5") Speaker Adapter (12mm, M4 Inserts)
Overview Heavy-duty 12mm speaker adapter ring for Fiat 500 / Abarth 500 (Mk312) (Tested with Fiat 500 312). Designed to replace flimsy commercial plastic brackets with a rigid, resonance-free 3D-printed solution. Fits standard 165mm…
- Downloads
- 25
- Likes
- 3
- Rating
- 0
P
PrintablesHzon 3D
Abarth Key Ring
The Abarth key ring is the latest one in my key ring series. Added 3 different sizes. I'm printing with support for the ring part.
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesNekich
Klíčenka Abarth AČR klubu
Klíčenka klubu Abarth klub AČR, vytvořená ke srazu v ČR na počest 75. výročí továrny ABARTH & C.
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
Printablesmeshvault3d
Abarth 205A Berlinetta
Abarth 205A Berlinetta is a digital STL model prepared for 3D printing. Preview renders show the supplied geometry from multiple angles. Choose scale, orientation, supports, layer height and material for your printer. Digital file only;…
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
PrintablesHzon 3D
Abarth 500 NOCO 30NLP Lithium battery adapter
This is an adapter for monting the NOCO Lithium battery 30NLP in a Fiat Abarth 500. Replacing the original battery in its original position, using the original battery fastener strap and clamp. The weight save is over 8.5kg!!!
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesKevin Wells
Fiat 500 Abarth - Clutch Alignment Tool
Clutch alignment tool for the manual Fiat 500 Abarths with the C510 transmission.
- Downloads
- 17
- Likes
- 6
- Rating
- 0
P
Printablesmeshvault3d
Abarth
Abarth is a digital STL model prepared for 3D printing. Preview renders show the supplied geometry from multiple angles. Choose scale, orientation, supports, layer height and material for your printer. Digital file only; no physical item…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablesmeshvault3d
Abarth 1000 SP
Abarth 1000 SP is a digital STL model prepared for 3D printing. Preview renders show the supplied geometry from multiple angles. Choose scale, orientation, supports, layer height and material for your printer. Digital file only; no…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
Printablesmeshvault3d
Abarth 2000 Sport
Abarth 2000 Sport is a digital STL model prepared for 3D printing. Preview renders show the supplied geometry from multiple angles. Choose scale, orientation, supports, layer height and material for your printer. Digital file only; no…
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesPawel Truszyn
Officine Abarth 500 (Fiat) floor mats emblem screw lock pin
Just a small model that goes with the aluminum "Officine Abarth" emblem on Fiat 500 Abarth. Print it with strong filament, I did it with ASA-CF, but ASA, ABS or PET G might work good as well.
- Downloads
- 8
- Likes
- 1
- Rating
- 5
P
PrintablesPMDprecision
Abarth Scorpion Logo Air Freshener Insert
Create your own unique air freshener with this 3D-printable keychain system! This modular design allows you to freely combine decorative inserts with two main body types: a classic hanging keychain body or a clip-on body for mounting on…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesScaniaman93
Fiat 500/Abarth upper rear shock absorber bush
Designed to replace the rear upper shock bush on Fiat 500/Abarth models but may fit Pandas etc. Designed with the dimensions from Powerflex's bushes due to them being the only ones to produce such a bush. Ensure you use a 30mm or bigger…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
Printables4sStylZ
Abarth 595 / 695 Ph3 Led fog light pods
Theses pods can be 3d printed in ASA with magnets enclaved for the 3d printed cover. They use a generic Chinese lamp that you can find on various seller. Let’s be honest, it’s not Tuningarts.uk carbon fiber pods with PIAA xenon lights,…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesKO3D
Fiat 500 Abarth (North America) 3D Scans
I got a Creality Ferret SE 3D Scanner and started scanning some parts of my car to test how the scanner does. I figured id upload them here for anyone that might have a use for them.
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesOtty_Skipper
Keychain Abarth Double-sided logo
Showcase your passion for Italian performance with this double-sided Abarth-inspired keychain. A sleek detail featuring the iconic logo on both sides, making a big statement for every petrolhead.
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesRBABARTH
Abarth Shock Cover
Abarth Shock Cover to protect from rust, you can then paint it or just add an abarth decal for style.
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesPaul H
Rear Dashcam Support For Abarth 124 / Mazda
Simple support designed for rear dash cam for an Abarth 124 spider, or Mazda mx5. Its normally quite awkward to fit a rear cam given the drop top, this is un affected when opening or closing the roof. The support slots between the wind…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printables
Fiat 500/Abarth upper rear shock absorber bush
Designed to replace the rear upper shock bush on Fiat 500/Abarth models but may fit Pandas etc. Designed with the dimensions from Powerflex's bushes due to them being the only ones to produce such a bush. Ensure you use a 30mm or bigger…
P
Printablesbraga3dprint
Abarth 1969 Lightbox LED Lamp
Rev up your space with this sleek lightbox featuring the iconic Abarth logo. Crafted with precision and automotive flair, this emblematic design pays homage to the renowned Italian racing brand. Perfect for car enthusiasts or as a…
- Likes
- 3
- Rating
- 0