1 / 2
Laser Engraver Mecpow X3 Pro Honeycomb H44 Adapter — image 1
1 / 2

Laser Engraver Mecpow X3 Pro Honeycomb H44 Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Laser Engraver Adapter, which helps with placing honeycomb under the laser.

Rating
5 / 5
Likes
20
Downloads
224
Makes
0
Views
976
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

Mecpow X3 Pro Honeycomb adapter

Hello, I've modeled and printed adapter, which helps in placing honeycomb H44 (44 cm x 44 cm) under my Laser Engraver Mecpow X3 Pro. I am not sure if it can fit to other models, but if I get information in future, I will update all information.

After you done printing it, you should print square with measurable offset (I've printed mine with distance 5 mm from left and bottom edge), and then measure it, like on photo:

Here for example we have 5.18 mm instead of 5 mm. This means our bottom offset should be reduced by 5.18 mm - 5.00 mm = 0.18 mm.

 

 

 

 

 

 

 

When we measure both (left and bottom offset) we go in Lightburn to Edit→ Dervice Settings (photo):

 

 

 

 

 

 

 

 

 

 

 

 

And changing Laser offset according to counted values.

(Remember, when you measured values lower than 5 mm offset is positive, when they are bigger than 5 mm - offset will have negative value).

 

 

Tags