Bambu Lab Nozzle Container (Gridfinity W2xD2xH4)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Getting my tools and spares set up in tool boxes I started with a "gridfinity home" for the three nozzles 0.2, 0.4, 0.6
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 82
- Makes
- 2
- Views
- 676
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Getting my tools and spares set up in tool boxes I started with a "gridfinity home" for the three nozzles 0.2, 0.4, 0.6. There is an existing gridfinity solution, but bin 2x3 and four nozzles which is too much for me, I stick with 0.2, 0.4, 0.6mm nozzles (hardened or stainless). And two additional socks have space too. And a little square plug with grip to close the compartment for the delivered screws.
The bin is 2Wx2Dx4H (4H = height =of 1.75mm). Four bottom pads are filled with infill. Faster print.
As the design is very compact I offer two bin versions: one completely closed on the bottom, another with five holes for better take-out of the three nozzles and the two socks. Take whatever you like most!
Front of the bin carries a 0.3mm indented Bambu Lab logo.
Design and outcome is quite compact, leaves a lot of room for more bins with appropriate content. So everything is pretty small size.
Printed on BL A1 in Prusament Army Green.
Explore my other Printables: https://www.printables.com/de/@Tritschi