Bambu Lab Nozzle Container (Gridfinity W2xD2xH4)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Getting my tools and spares set up in tool boxes I started with a "gridfinity home" for the three nozzles 0.2, 0.4, 0.6
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 82
- Wydruki
- 2
- Wyświetlenia
- 676
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Getting my tools and spares set up in tool boxes I started with a "gridfinity home" for the three nozzles 0.2, 0.4, 0.6. There is an existing gridfinity solution, but bin 2x3 and four nozzles which is too much for me, I stick with 0.2, 0.4, 0.6mm nozzles (hardened or stainless). And two additional socks have space too. And a little square plug with grip to close the compartment for the delivered screws.
The bin is 2Wx2Dx4H (4H = height =of 1.75mm). Four bottom pads are filled with infill. Faster print.
As the design is very compact I offer two bin versions: one completely closed on the bottom, another with five holes for better take-out of the three nozzles and the two socks. Take whatever you like most!
Front of the bin carries a 0.3mm indented Bambu Lab logo.
Design and outcome is quite compact, leaves a lot of room for more bins with appropriate content. So everything is pretty small size.
Printed on BL A1 in Prusament Army Green.
Explore my other Printables: https://www.printables.com/de/@Tritschi