Shure SRH840 SRH440 Toughened Headband Adjuster Joints Headphones
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Repair part for a critical design flaw in Shure headphones
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 140
- Makes
- 1
- Views
- 738
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- GNU General Public License v2.0
Cheap and long-lasting repair of critical design flaw in Shure SRH-840 headphones. I've owned many pairs due to them all failing by snapping at the connection between the pivot block holder and the adjustment arm
My one pair of SRH-940s set also failed in this way long ago and I suspect this would have fixed them too. Alas, I disposed of them so I have not tried to fit these to a pair. If someone would, I'd appreciate it if they could give it a go and let me know if it fits.
I've had the best results with ABS+ parts (my longest-lasting repair part being made of esun Cold White ABS+) but have had PLA parts last a while too. However, I find PLA does work harden quickly and fails sooner, so if you're printing these in PLA, I recommend having a couple of spares printed out in advance to reduce your downtime.
Your best settings will vary but I've found the most success using more than 100% flow and enough walls not to produce any infill. As hot as can be printed without droop.
Thanks to @bombela for modelling the original fitting replacement and saving me from buying what would be my eighth replacement for these headphones in 10 years.
Based on the original model, which I've printed a few times, this model:
Places a wide filet at the connection between the swivel joint and the adjustment arm to increase layer contact at the expense of 2-3mm of adjustment height
Labels the left and right arm to prevent mix-ups in printing/installation which cause the arm to be loose
Swivel blocks now take x4 m1.6 heat-set inserts and pairs with a replacement to the OEM cover plate. This was in response to the small locating pegs breaking off after a couple of replacement rounds.