Search results: shure

Counting matching models…

Printables

Shure SM7B / SM7dB cable retainer

Small retainer to tidy up the cable on the Shure SM7B and SM7dB microphones. > 10 min print using PLA Infill set to 75%

Printables

SHURE SLXD2 Antenna color code | SBC203 compatible

Printed from PETG, 4 walls and 100% infill because of transparency from choosen material. After printing just unscrew the battery holder, with flat head carefully unclip the original and xlip on the modified version.

Order a print of this model

Printables

Shure SM7B & Thomann FetAmp Support Sleeve

I have created a support sleeve for the FetAmp by Thomann for the use with a Shure SM7B. This barrel amp plus an XLR cable can be a quiet long and fragile structure. This sleeve has three inner diameters and one hole for the XLR lock.…

Order a print of this model

Printables

Volume Clip Shure P3RA

Clip for the volume knob on the for a Shure P3RA body pack.

Order a print of this model

Printables

SHURE Battery Clip for QLXD2, ULXD2, AXIENT AD2 (CUSTOM) 95A29359 REBUILD

Rebuild the model to correct all the mistakes in the original one.

Order a print of this model

Printables

Wireless Shure Receiver Rack Ear Blank

A compatible replacement in case you lose the original blanks that your wireless Shure rackmount hardware comes with. I print these out of PETG, but flex filament may also work well. Print in the orientation provided (flat side down) with…

Order a print of this model

Printables

Shure SM81 low cut switch cap

Replacement cap for the Shure SM81 low cut switch. Can be twisted with fingers or a guitar pick. There's no retention mechanism like the factory switch in order to avoid supports on a part this small, but the friction on the switch shaft…

Order a print of this model

Printables

Shure SRH840 SRH440 Toughened Headband Adjuster Joints Headphones

Cheap and long-lasting repair of critical design flaw in Shure SRH-840 headphones. I've owned many pairs due to them all failing by snapping at the connection between the pivot block holder and the adjustment arm My one pair of SRH-940s…

Order a print of this model

Printables

Shure MX412 / MX418 Gooseneck clip

I designed this model years ago when I worked for PSAV/Encore (If you know, you know) and now re-vamped it with no logo for the masses to use. Check out the original model on Thingiverse: https://www.thingiverse.com/thing:3293672 Simply…

Order a print of this model

Printables

Shure SM57/8 Flexible Shock Mount

This model needs to be printed in a flexible filament. The model shown in this post is printed in TPU with a Shore Hardness of 95A. It should also be printed with 100% infill. The mount can support the weight of a Shure SM57/8 when…

Order a print of this model

Printables

EXTENDED: Color Identification Cap for Shure BLX2 Wireless Mic

Extended the cap so that its easier to identify at distance. Especially for those that like to hold the microphone lower on the handle.

Order a print of this model

Printables

Shure sm58 to Shure sm7B

Transform your Shure SM58 into a Shure SM7B with 3D printing, and save around $300! The Shure SM58 has similar technical specs to the Shure SM7B; the main differences between the models are the pop filter and design. We can’t replicate…

Order a print of this model

Printables

Knob for Shure diversity receiver UT4A

Replacement for lost knob. Print instructions Category: Audio Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Supports: No Resolution: 0.15x0.4mm Infill: Octagone Filament: esun PETG black Post-Printing A tad white color to see it…

Order a print of this model

Printables

4x Shure SM57 Tray

A tray that holds 4 Shure SM57 microphones so that they take up minimal space in the case drawer without flying around. It features a space for 19mm spike tape for labeling as well as slots to easily grab the mics.

Order a print of this model

Printables

6x Shure SM58 Tray

A tray that holds 6 Shure SM58 microphones so that they take up minimal space in the case drawer without flying around. It features a space for 19mm spike tape for labeling as well as slots to easily grab the mics.

Order a print of this model

Printables

Shure MV7+ Stand

This 3D model is a custom stand modification designed specifically for the Shure MV7+ microphone. It includes an integrated base that accommodates five M10 nuts, providing additional weight for enhanced stability during use. Whether…

Order a print of this model

Printables

Shure Sm57 Pop filter holder

Works on Shure SM57 or the Pyle alternative. uses a M5 Screw to hold a pop filter

Order a print of this model

Printables

Color Identification Cap for Shure BLX2 Wireless Mic

This model snaps in to the color cap area on the bottom of a Shure BLX2 mic. Allows you to print your own color caps in whatever color you want to identify your mics easily. Under the battery cover at the bottom of the mic is a small…

Order a print of this model

Printables

Shure SLXD2 SM58 Identifier Ring

I needed a means of identifying my microphones that would be subtile, yet still easily recognizable. I took a look at the SLXD2 mic and saw this space specifically between the SM58 grill and the microphone body. It had an unusual shape…

Order a print of this model

Printables

Super Slim Mic Stand - Shure Antenna Paddle Stand

My wireless mic kits are (mostly) self contained, with one box containing receivers, cables, antenna paddles, etc. and another box containing transmitters and their accessories. The one thing that doesn't fit in either of these boxes is…

Order a print of this model

Printables

Shure lapel microphone clip

Never let a broken clip ruin your recording! This is a precision-engineered replacement mount for Shure lapel microphones. It is designed specifically to work with the standard Shure alligator clips that feature the dual-prong "slide and…

Order a print of this model

Printables

Desk Mount for Shure MX418C

This is an adapter ring that fits the included desk mount of the shure MX418C. Our previous speaker mic had a way bigger desk mount, so when we upgraded to the Shure MX418C the included desk mount did not fit. Since i want to keep the…

Order a print of this model

Printables

Shure ULDX4 Single Rack Ear

This is the short side rack ear for a ULDX4 system. uses only the flush bottom screws which are enough for rack mounting. Print exactly how it would hang for best strength. I used this in a custom single rack that is created for mounting…

Order a print of this model

Printables

Shure Wireless Capsule Cap

This is a recreation of the Shure wireless capsule cap that comes included with shure wireless capsules (at least the Nexadyne 8 line). I needed some extra caps and I did not see anyone selling protection for capsules. It's important to…

Order a print of this model

Printables

Microphone Adapter 5/8" for MV7 Shure and compatible

5/8" mount for the "Adjustable Microphone Arm" by Neevoet ( https://www.printables.com/model/962164-adjustable-microphone-arm ). Fits the Shure MV7 and compatibles. Best printed with: 0.2mm layer height 25-30% infill 3 perimeters auto…

Order a print of this model

Printables

SHURE PG 57 MICROPHONE GRILL

Ad a gril to main body on top

Order a print of this model

Printables

Shure SM58 Mic Battery Cup Replacement

The battery covers or cups on the wireless Shure SM58 easily crack and eventually break around the threads if you twist the cap on a little too tight. This started as a remix of pmcpajadan's battery cover but I decided to re-implement it…

Order a print of this model

Printables

SHURE Battery Clip for QLXD2, ULXD2, AXIENT AD2 (CUSTOM) 95A29359

This is a clip to replace the Shure 95A29359 when you loose it. It is not a 1:1 copy, it is wider to be more obvious and fit the foam tape you can buy in the store. This does not fit the stow compartment and depending on what method and…

Order a print of this model

Printables

Case for Shure Beta 91A Mic

I used PETG as it will be used for gigs, so the strength is needed for lugging about. Used 20mm M3 Bolts and TPU for the seal, print facing up - you can see the bed texture on the print, no support required. Padding is recycled denim but…

Order a print of this model

Printables

Battery cover SHURE PGX2

PETG, 5% inf, 0.2mm

Order a print of this model

Printables

SHURE SM58 Microphone Replica/Prop

A printable 1:1 model of the Shure SM58 microphone. Designed to help prototype a custom grip. Could also be a prop.

Order a print of this model

Printables

Thin Microphone Anti-Roll Collar compatible with Shure Microphone

This version has less plastic on the Anti-Roll collar as an experiment to see if it changes the frequency response of the microphone.

Order a print of this model

Printables

"Ring" Anti-Roll Collar compatible with Shure Microphone

This version has less plastic on the Anti-Roll collar as an experiment to see if it changes the frequency response of the microphone

Order a print of this model

Printables

Shure BLX2 Battery Case

I suppose, the only one file of this part in Internet

Order a print of this model

Printables

Shure ULXD1 bodypack holder

I needed a better way to organize my tech drawer, so I made this organizer. It holds four Shure ULXD1 bodypacks (with microphone connector notch cutouts) and has extruded labels in each slot so you can keep your wireless bodypacks nice…

Order a print of this model

Printables

Shure P9RA (PSM) Organizer With Numbers

A four pack organizer for Shure's P9RA wireless in-ear bodypacks (used with Shure's PSM transmitter series). Can fit in a 1U workbench organizer drawer (Husky) but the antennas poke out, so use 2U drawers or deeper. Comes with labels at…

Order a print of this model

Printables

C BLOCK TO ENSHURE MIC STAND STAYS CLOSED UP

A 3D-printable clip that keeps foldable mic stands securely shut. Easy to use, great for musicians and audio techs. MicStand, 3DPrint, CBlock, AudioGear, DIYAudio, Printables, 3DPrinted

Order a print of this model

Printables

Shure Brothers VA300-S Name Plate

Top badging/name plate for a Shure Brothers VA300-S speaker cabinet.

Order a print of this model

Printables

Shure SM57 Insert (Gridfinity)

Insert for SM57 based on gridfinity

Order a print of this model

Printables

Shure GLXD16 Transmitter Receiver Holder / Mount

A basic wall mountable holder for the Shure GLXD16 transmitter.

Order a print of this model

Printables

Shure SM98A microphone clip

The microphone Shure SM98A is no longer selled, and neither are spare parts. The microphone is very small and so are its surrounding parts. This model is a remake replacement part for the tiny clip microphone holder, which is mounted on…

Order a print of this model

Printables

Shure SLXD4D Rack Ears

Replacement rack ears for the Shure dual channel microphone receiver. Designed to be printed with the front plate at the print bed and without supports. Even with basic perimeter settings, appears to be sturdy enough when printed with…

Order a print of this model

Printables

Shure Wireless SM58 (model SLXD2 H56) Microphone Identification

To put the ring back in place, you will need to unscrew the grill, put the ring back in place, and screw the grill back in place. I stuck colored labels on the console with double-sided tape. Category: Gadgets

Order a print of this model

Printables

Shure MV7+ Mic Stand

Includes both a freestanding hemispherical stand and a "core" of correct dimensions for integration into other projects.

Order a print of this model

Printables

Shure PGX2 Microphone Battery Compartment

This is a replacement for the Battery Holder in a Shure PGX2 Microphone.

Order a print of this model

Printables

Shure SM7B / SM7dB cable retainer

Small retainer to tidy up the cable on the Shure SM7B and SM7dB microphones. > 10 min print using PLA Infill set to 75%

Order a print of this model

Printables

Wall Rack for Shure SM58 Microphones - 2 sizes

I designed these mic racks for colleagues in the music department at school. They are now installed in a music room and behind the stage in our auditorium. They are sized to fit Shure Sm58 mics, but when testing them others fit as well.…

Order a print of this model

Printables

HSW Shure SM58 Holder

This design is a simple vertical holder for the legendary Shure SM58. It has a cutout an attached cable can be simply slid through. This is designed to fit onto a HSW (Honeycomb Storage Wall). I will provide different sizes for different…

Order a print of this model

Printables

Shure SM58 Microphone Sleeve Mount for DM4/7/9 Digital Microscope Arm Stand

This sleeve helps secure an SM58 or other similarly shaped microphone into the slot for a desk-mounted digital microscope stand. The model is designed specifically for stands which are compatible with cheaper microscopes you may find on…

Order a print of this model

Printables

Tapa microfono SHURE

He diseñado una tapa para los microfonos de Marca Shure. Se puede imprimir en multicolor, ademas el archivo ''cinta'' puedes marcarlo de diferente color para identificar distintos microfonos. Queda genial¡¡¡ lo suyo es imprimirlo en PETG…

Order a print of this model

Printables

Shure SM7B SM 7B Adapter 90° 90 Degree Turn Adapter e.g. for Rode PSA 1

A little piece to adapt the notches to turn the mount of the SM7B 90 degrees, so that the output jack is oriented 90 degrees turned, because I had problems with the clearance with my boom arm but theres more than enough space on the…

Order a print of this model

Printables

Shure MV6 Pole Mount

The mic is angled up at 25deg from the pole. The mount is designed for poles with a diameter of ~35mm. You should print in something less stiff than PLA (i.e. PETG or ASA) if you've got to "snap" the opening around a pole and can't guide…

Order a print of this model

Printables

SHURE SLXD2 Antenna color code | SBC203 compatible

Order a print of this model

Printables

Shure SM7B Conversion Kit For Behringer XM8500

This is a broadcast-style conversion kit for the XM8500, designed to mimic the aesthetic of the Shure SM7B. The model was developed in Fusion 360 using precise caliper measurements of the XM8500. While the internal dimensions are…

Order a print of this model

Printables

Shure SM7B & Thomann FetAmp Support Sleeve

Order a print of this model

Printables

Shure PG58 wireless mic color cap

My first shared project - We have Shure BLX wireless PG58 mics, and they can be challenging to keep sorted during a performance when someone puts them down. They have a cap under the battery cover that can be replaced with different…

Order a print of this model

Printables

Volume Clip Shure P3RA

Clip for the volume knob on the for a Shure P3RA body pack.

Order a print of this model

Printables

SHURE Battery Clip for QLXD2, ULXD2, AXIENT AD2 (CUSTOM) 95A29359 REBUILD

Rebuild the model to correct all the mistakes in the original one.

Order a print of this model

Printables

Shure SM57 clamp for a condenser mic

This clamp is perfect for combining shure sm57 and other small diaphragm condenser mics and having them aligned. It is useful for hihats snares guitar amps recordings and much more!!!

Order a print of this model

Printables

Wireless Shure Receiver Rack Ear Blank

Order a print of this model

Printables

Shure AA Battery Clip Adapter for ULXD2, AD2, QLXD2

I printed these out of ASA for durability and then cut a piece of 1/8” frost king pipe insulation for the pad. https://www.frostking.com/products/pipe-duct-insulation/rubber-insulation-tape Print settings with my 0.4mm HF nozzle were…

Order a print of this model

Printables

Shure P3T Mount

I made this model to be able to attach my P3T transmitters up to the underside of the stage. The inside of the mount has about 2mm of slack in both directions so you shouldn’t have to fight to get your transmitter in or out. The mount…

Order a print of this model

Printables

Shure SM81 low cut switch cap

Order a print of this model

Printables

shure battery cap for SVX2 j9

based on modification of Shure BLX2 Battery Case

Order a print of this model

Printables

Shure_GLXD2 antiroll

This is an antiroll cage suited for the Shure GLXD2 wireless handset. With my printer the part slid up snugly right above the switch and sits there secure without any further fixation. Dependent on you printer/Slicer setup your result…

Order a print of this model

Printables

shure blx288 rack mount 1 HE

Didn't find something like this online so I made my own. Printed with 45° angle for max. stability. Holds up pretty well now for over 1 year. Printed in petg with 3 walls & 10% infill. You need m4 countersunk screws: 4x 10mm, 2x 12-16 mm…

Order a print of this model

Printables

Shure MV7X pop filter holder

I was annoyed by the lack of any pop filters that could be easily attached to my MV7X. Decided to make one. This requires purchase of a full pop filter and then reuse of just the filter with a metal stand that fits into this model. Check…

Order a print of this model

Printables

Anti-Roll Collar with holes compatible with Shure Microphone

Just added some holes which keeps the pattern of the mike and also less filament. Best printed in TPU, no support needed, infill between 80 - 100% Happy printing

Order a print of this model

Printables

Shure SRH840 headphone headband joint replacement

This is a replacement for the Shure SRH840 headphone joints (left and right) connecting the sliding band to the speakers. Each side is two parts. Connected with a rod. And two little caps to finish it up. That way you can print the caps…

Order a print of this model

Printables

Shure Microphone Side-Pole Mount Clip

Printed upright so that layer lines allow for bending in the clip. Tree supports for the bolt hole. I printed with 6 perimeter walls for strength but also flexibility. I also used ABS since I plan to use this outdoors with a high school…

Order a print of this model

Printables

Shure SM-58 Microphone tray

Designed to package or display Shure SM58 Microphones. No supports required.

Order a print of this model

Printables

Shure M44-7 DJ Turntable Stylus Guard

Stylus guard for the Shure M44-7. Made for a friend. Little bit of support may be needed, uses less than 1g of material overall. Included Fusion 360 file. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…

Order a print of this model

Printables

Shure MV7 Table Stand

Shure MV7 Table Stand Hey maker! 👋 A simple and practical stand for your Shure MV7 microphone. Features: Solid base design for extra stability. Super practical for temporary use until your microphone arm arrives. Tested in real use for a…

Order a print of this model

Printables

Clip for Shure BT-1 Bluetooth Headphones / cable

The clip that came with my Shure BT-1 headphones broke after a few months (weeks?). I recently found the pieces and thought "hey, I can design and print a part for this". After quite a few iterations I was happy with how it attached to…

Order a print of this model

Printables

Sterling ST170 and Shure SM57 dual mic holder

I wanted to copy the Royer R121 and SM57 combo mic holder, but with the bigger body Sterling ST170. The opening for the ribbon mic is 32-35mm ish. I printed it in PETG at about 20% infill so it'd flex a bit. To attach it to a mic stand, I…

Order a print of this model

Printables

microphone holder for shure sm58 top part

This is the upper replacement part of a shure microphone holder. Printed with black PETG with support. The stl is a little bit messy, but slicer correct it when u load. top microphone hole diameter: 25mmm bottom microphone hole diameter:…

Order a print of this model

Printables

Microphone clip/mount for Shure SM58 & similar

Mount (clip) for Shure SM58 and other compatible microphones. With 3/8-16" mount (for standard microphone stand) and 1/4-20" mount (for photo stands/tripods). Can be used with original screw and nut as well as any part can be used instead…

Order a print of this model

Printables

Shure SM7B Vive Tracker Mount

I recommend using this screw to mount the vive tracker (amazon affiliate link): https://amzn.to/3uFviS1 Once you print all of the parts you can weld them together. If you're curious of the applications of this you can check out this video!

Order a print of this model

Printables

Mount for DIY Shure SM7B Mod

After seeing Caleb Pikes Video about building a SM7B with a XM8500 or SM58, I instantly knew, that I wanted to build one. I had my problems with the 5/8 mount, he put on it, so I made my own mount. I also had a Tonor TC30 laying around,…

Order a print of this model

Printables

Shure MV7 USB, Audio Jack Strain Relief

This model is to support the micro usb and 3.5mm audio cables sticking out the back of your Shure MV7 microphone. This prints as a single piece with no support and requires no hardware or tools to install, it is held in place by the XLR…

Order a print of this model

Printables

SHURE SRH440 hinge cover replacement

This is a 3d model of the hinge cover on my SRH440 headphones, which was completely broken after a rough trip. alternative keyword: srh-440

Order a print of this model

Printables

Custom Shure SM7B Custom backplate

This is a 1:1 replacement model for a Shure sm7b backplate. Feel free to edit it with your custom logo! Category: Replacement Parts

Order a print of this model

Printables

Shure MV7/MV7+ debranding covers

These are covers for the Shure MV7/MV7+ microphone. Print it with a larger brim to help it stick to the print bed. To attach it to your microphone there is nothing else needed, it holds well due to the conical shape. Just stick it on with…

Order a print of this model

Printables

SHURE 1/2 Wave Omni Receiver Antenna clip

This is an antenna clip for a 1/2 wave omni receiver antenna clip. U can use it on a traverse or microphone standard. This design is printable without support. I didn't design the thread in the object, feel free to do it. I heated one of…

Order a print of this model

Printables

Shure PGXD4 and MOTU M2 Under Desk Mountable Mini Rack

Pieterv24's MOTU M-Series Under Desk Mount but with a second slot for a Shure PGXD4 Wireless Microphone Receiver system. It should fit fine with the model that we purchased this year, no guarantees if Shure makes a revision to the body at…

Order a print of this model

Printables

Shure PGA48 Microphone Shockmount

Attachment hole diameter is 8mm, 5.5mm wide/deep, max 23mm outer diameter around hole. Examples in image are printed in PETG and use generic hardware store shock cord. v2 .stls are for the right one, v5 for the left. v5 outer ring…

Order a print of this model

Printables

Shure MV7 Stand - Short

Shortened / remixed stand for the Shure MV7 microphone.

Order a print of this model

Printables

Shure 520DX bullet microphone holder remix

Shure 520DX bullet harmonica microphone holder with angled stand attachment point. Holds the mic at a comfortable angle for guitarists who need the mic stand out of their way. Remixed from https://www.thingiverse.com/thing:26813 Category:…

Order a print of this model

Printables

Shure MX412/418 "Presidential Mic Setup" Clip

Wanted a more elegant solution to holding podium mics in a "Presidential Mic" setup than gaff tape. This little clip was born. Optimally it would be printed in black. Push the flexible part of the neck into the opening on either side then…

Order a print of this model

Printables

Knob for Shure diversity receiver UT4A

Replacement for lost knob. Print instructions Licence: Creative Commons - Attribution Category: Audio Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Supports: No Resolution: 0.15x0.4mm Infill: Octagone Filament: esun PETG black…

Order a print of this model

Printables

Shure SM 57 - AKG C451 Clip

I printed it in PLA at 0.2mm and 20% infill and it works just fine

Order a print of this model

Printables

SHURE AD1 BODY PACK Transmitter Holder

This is a mounted holder for the SHURE AD1 BODY PACK Transmitter. At the station I work at the mic cords would get damaged from being wrapped around the transmitter. So I designed this mount to let the body pack sit in and allow the mic…

Order a print of this model

Printables

Shure ULX Battery door

I recently got asked to run sound for a local high school and they had a couple body packs that had broken battery doors rendering the pack useless. Desperate for a few extra mics I decided to make a replacement door myself. These are…

Order a print of this model

Printables

Shure SM57 microphone stand

I've added fastening for a shure sm57 (and similars) to the original model.

Order a print of this model

Printables

Shure SRH840 SRH440 Toughened Headband Adjuster Joints Headphones

Order a print of this model

Printables

Headphone Replacement Shure SRH 940

Its a Complete Replacement for the Shure SRH 940 headphones. Printet in PETG with 4 walls and 20% infill. For the Headband, its best to print it solid and i uesd a brim. For the brackets you need support. i Printed it in an upright…

Order a print of this model

Printables

Sound devices 8 series Shure ADX5D rear slot

PETG or ABS, 2-3 wall thickness and little infill, I have used 20%. Use two ¼" screws, max 3mm heads.

Order a print of this model

Printables

Shure sm57/58 Microphone and Headphone Clamp Stand

Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.

Order a print of this model

Printables

Shure QLXD/ULXD Color ID ring

This is a color ID band that fits on to Shure handheld microphones in the QLXD (and others) line. These are used so that the sound guy can tell which mic is being used on stage at any given moment. Instead of buying a set with basic…

Order a print of this model

Printables

Shure to K&M Adapters - 3/8"-16 inner to 5/8"-27 outer thread reducer

The industry standard for microphone-stand mounting threads is 5/8"-27. European manufacturers, most notably "K&M König & Meyer", use 3/8"-16 threads however. This makes the american and european equipment incompatible and most american…

Order a print of this model