Shure SM58 Identification Ring (Wired)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple ring to color-code multiple wired SM58 microphones.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 246
- Makes
- 1
- Views
- 1,437
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick print to make a small color-coded identification ring for multiple Shure SM58 microphones. It will only fit the wired version of the SM58; the wireless variants are larger, and other people have made identification rings for those.
The ring should be a snug fit to slide on and cover up the model number band at the top of the microphone after removing the grille. The tolerances are very tight, so depending on how accurate your printer is, you may have to slightly adjust the scale, as even a 0.05mm difference in the inner diameter makes a big difference in how tight or loose it fits. A snug fit is good so it doesn't move and rattle around when the mic is handled.