1 / 2
Shure SM57/8 Flexible Shock Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Isolate your microphone from bumps and spring noise with this printed replacement for the stock Shure SM57/8 mount.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 1
- Views
- 399
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — NoDerivatives
This model needs to be printed in a flexible filament. The model shown in this post is printed in TPU with a Shore Hardness of 95A. It should also be printed with 100% infill.
The mount can support the weight of a Shure SM57/8 when inverted, but needs to be set deeply into the mount by twisting the microphone back and forth as you pull it through the mount hole.