Shure sm58 to Shure sm7B
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The case for convert Shure SM58 to Shure SM7B style and save ~300$
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 411
- Makes
- 2
- Views
- 2,835
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Public Domain
Transform your Shure SM58 into a Shure SM7B with 3D printing, and save around $300!
The Shure SM58 has similar technical specs to the Shure SM7B; the main differences between the models are the pop filter and design. We can’t replicate the pop filter in a DIY style, so I recommend simply purchasing one from Shure.
Required parts:
- One heat insert for ¼ inch (I recommend CNC Kitchen)
- Three M3 bolts (DIN 965, 3x12)
- Three M3 nuts
- The Shure SM58 itself
I tried to design a solution that uses 3D-printed bolts and nuts, but I couldn’t make it work. All files can be found in the OnShape project, in the "Archive" folder. Fill free to suggest your solution to make the project full 3d printable.
OnShape project here
Printing suggestion. (3mf file also available)
- Heat insert require at least 3.3mm of wall. I just print “¼ mount” with 100% infill, it also good for bolts holes.
- Print “Grill” with 0.2 nozzle if it's possible, for me 0.2 add more details compare 0.4, but post processing require.
- Apply fuzzy skin for main holder (from 0.0 to 82.4)
- Add 100% modifier near bottom bolt mount, it good to add additional strength here)
Assemble instruction.
