Wireless Shure Receiver Rack Ear Blank
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An antenna/bulkhead connector blank replacement compatible with all Shure wireless rackmount gear.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 108
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
A compatible replacement in case you lose the original blanks that your wireless Shure rackmount hardware comes with. I print these out of PETG, but flex filament may also work well.
Print in the orientation provided (flat side down) with no supports needed. I recommend a textured sheet and/or setting your bottom layer to be concentric for aesthetics. 10-15% grid infill works fine.
Made using FreeCAD 1.1rc3. STEP file is provided for easier modification, but can upload the FreeCAD project file(s) upon request. The tree is just poorly labeled is all.