Sterling ST170 and Shure SM57 dual mic holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to copy the Royer R121 and SM57 combo mic holder, but with the bigger body Sterling ST170.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 226
- Makes
- 0
- Views
- 1,591
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
I wanted to copy the Royer R121 and SM57 combo mic holder, but with the bigger body Sterling ST170. The opening for the ribbon mic is 32-35mm ish. I printed it in PETG at about 20% infill so it'd flex a bit. To attach it to a mic stand, I made the print so that you have to use an old mic clip and unscrew it, use the part that threads into the mic stand from the clip that came with your 57 (haha). Its just stronger and more dependable this way. You can see the black plastic in the side picture that shows how I did this.
To keep the mic in phase, slide the 57 back til the back of the ring holding the 57 lines up with the back line in the 57 mic body. Basically makes the sides of the ST170 line up with the gap in the 57 between the spinning grill and the mic body. You may have to flip the phase of 1 mic for it to line up correctly in your DAW.
